| Close="" look of the SPI flash. | The pins soldered. |
 |
 |
| SB6120 Cable modem |
Motorola SB6120 surfboard
This modem DOCSIS 3.0 modem and has TI pumma5 family. The CPU core is ARM core. It employs 8M SPI flash.Use USB JTAG NT's can program the flash ISP.
| The fornt of the PCB board.
|
||||
|
||||
| The back of the PCB board. The ISP pin is in the red square. | ||||
| The ISP pin (TRST from USB JTAG NT). |
| JTAG connector of USB JTAG NT | Connector of u-Link NT | Pin on the flash |
| Pin 1(TRST) | Pin 1(3.3V) | ISP in on the back of the board.(R362) |
| Pin 3(TDI) | Pin 10(IO0) | Pin 15(SI) |
| Pin 5(TDO) | Pin 8(IO1) | Pin 8(SO) |
| Pin 9(TCK) | Pin 6(IO2) | Pin 16(SCK) |
| Pin 11(RESET) | Pin 4(IO3) | Pin 7 (CS) |
| Pin 2(GND) | Pin 2(GND) | Pin 10(GND) |
| Definition | Commands (usbjtag NT 0.07 and up): |
|
TSB6120.xml |
Backup firmware getram 0 800000 save 0 800000 Program flash flshdct 0 ldram 0 erase 0 800000 sprogram 0 800000 Compare the result cmpram 0 800000 |
