Debrick SB5100 video with CE method.

SB5XXX,SBV5XXX
Post Reply
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Debrick SB5100 video with CE method.

Post by usbbdm »

http://www.usbjtag.com/vbforum/download ... file&id=90
Download and watch, hope this can help you fix the modem.
http://www.usbjtag.com/jtagnt/debricksb5100.php to find the CE.
snookid
Junior Member
Posts: 3
Joined: Sat Dec 13, 2008 12:21 pm

Post by snookid »

will this method work with the 5101 too . thank
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

snookid wrote:will this method work with the 5101 too . thank
Of course it will work.
But with 0.23 NT you can try to use tap method first. Sometime if you get DEBUG ON you can then fix the modem without CE method.
snookid
Junior Member
Posts: 3
Joined: Sat Dec 13, 2008 12:21 pm

Post by snookid »

usbbdm wrote:Of course it will work.
But with 0.23 NT you can try to use tap method first. Sometime if you get DEBUG ON you can then fix the modem without CE method.
can you link to the tap method . thank
ttsatellite
Junior Member
Posts: 15
Joined: Sun Jul 19, 2009 5:03 pm

ALL the lights keep blinking

Post by ttsatellite »

I don't know, please help. All my lights of sb5101 keep blinking non stop. I have try several way but not working. when i click on detect it shows 00000000 and nothing much i could do. I have done with the CE to the pin and still nothing change. Please help usbbdm.

thank you
UserName
Junior Member
Posts: 268
Joined: Sat Jun 07, 2008 2:56 pm

Post by UserName »

something similar can be done to dcts too i done to 2500 and 700

actually you can be amazed with right info hardware based to can even block the auth to the xc chip problem is the nvram becomes disconnect but xc does not lose the channels.
do not believe what i say 10% its true :confused:
ttsatellite
Junior Member
Posts: 15
Joined: Sun Jul 19, 2009 5:03 pm

Post by ttsatellite »

anyone else, please
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

If CPU ID is 00000 check your connection or your hardware problem.
If flash is 00000 use CE method.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests