USB JTAG  

Go Back   USB JTAG > USBJTAG (NT) > Devices > USB JTAG (NT) on VOIP device.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-23-2009, 04:59 PM
cephaswangtw cephaswangtw is offline
Junior Member
 
Join Date: May 2009
Posts: 7
Default How to config for WGR615V FLASH with Intel 28F640J3 ?

How to config for WGR615V FLASH with Intel 28F640J3


==========================================
EJTAG Debrick Utility v2.1.4-Tornado-MOD
==========================================

Probing bus ... Done

Instruction Length set to 5

CPU Chip ID: 00001011010100101101000000101111 (0B52D02F)
*** CHIP DETECTION OVERRIDDEN ***

- EJTAG IMPCODE ....... : 01000001010000000100000000000000 (41404000)
- EJTAG Version ....... : 2.6
- EJTAG DMA Support ... : No
- EJTAG Implementation flags: R4k DINTsup ASID_8 NoDMA MIPS32
*** DMA Mode Forced Off ***

Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Skipped
Halting Processor ... <Processor Entered Debug Mode!> ... Done
Clearing Watchdog ... Done
Manual Flash Selection ... Done

Flash Vendor ID: 00000000000000000000000010001001 (00000089)
Flash Device ID: 00000000000000000000000000010111 (00000017)
*** Manually Selected a Intel 28F640J3 4Mx16 (8MB) Flash Chip ***

- Flash Chip Window Start .... : b0000000
- Flash Chip Window Length ... : 00800000
- Selected Area Start ........ : b0000000
- Selected Area Length ....... : 00020000

*** You Selected to Backup the CUSTOM.BIN ***

=========================
Backup Routine Started
=========================

Saving CUSTOM.BIN.SAVED_20090601_114326 to Disk...
[ 0% Backed Up] b0000000: ffffffff ffffffff ffffffff ffffffff
Reply With Quote
  #2  
Old 07-04-2009, 01:57 PM
usbbdm usbbdm is offline
Administrator
 
Join Date: Jul 2005
Posts: 8,496
Default

I have remotely configured the xml and it programs well now.
For all those TI devices (most VOIP and some cable modems) when bricked, set to 3MHz JTAG speed is easy to work with. I will soon compile a page describe how to program this device.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 03:43 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.