tg862
-
- Junior Member
- Posts: 71
- Joined: Sat Jan 12, 2008 7:03 pm
tg862
hi usbbdm...... i dont see select target for this modem in sofware... can you please help? thanks
or how to add tm862 xml?
or how to add tm862 xml?
-
- Junior Member
- Posts: 8979
- Joined: Mon Jul 18, 2005 9:33 pm
You need to tell more about the modem. SPI flash? Size of the flash?afterhoursalex wrote:hi usbbdm...... i dont see select target for this modem in sofware... can you please help? thanks
or how to add tm862 xml?
I would use a similar xml first and see if it can work. Then make a copy under tools to create new xml.
-
- Junior Member
- Posts: 133
- Joined: Sat Nov 29, 2014 12:41 pm
SPI read/write already supported here are the XMLs, it has 2 flash chips one on top and one on the back (one of these is the modem OS and one is the router OS)
Pics on this post viewtopic.php?t=8747
Pics on this post viewtopic.php?t=8747
You do not have the required permissions to view the files attached to this post.
-
- Junior Member
- Posts: 71
- Joined: Sat Jan 12, 2008 7:03 pm
-
- Junior Member
- Posts: 2
- Joined: Thu Jul 28, 2022 7:05 pm
Re:
Regards,
i own a TG862G (front and back chip)suddenly started acting anormally, it's restating even without theISP coaxial connected, it was working good, i suspect the isp did something and the flash got damaged, i tried over telnet to see logs for troubleshooting but it keep reseting (lan disconnected) and won't have time to do anything, then finally does a full restart
i have some doubts, what is the best firmware for this version?
can i repair this modem without loosing other functions like wify, telephone..... ?
it has two chips, i bought the test clip 3m 16 pins available, also came with a cable ready for jtagNT
if can't repair original firmware, what is the best option (modded firmware) available for this model ??
i will get a power source to supply the 3.3V (orange cable) then connect the test clic, don't know exactly the pin numbers , jtag has 14 pins, don't know the order,
if connection is the same as SB6120: usbjtag.com//jtagnt/sb6120front.jpg
but on jtag nt device how i know who is who (pin numbers)
if i connect wrong will the device(jtagnt) got damaged ??
this is my first time trying to use jtag nt, so sorry for many cuestions, i bought it many years ago but never had to use it before
cables + device: https://ibb.co/h7Fm4D1
-
- Junior Member
- Posts: 2
- Joined: Thu Jul 28, 2022 7:05 pm
-
- Junior Member
- Posts: 2
- Joined: Thu Jul 28, 2022 7:05 pm
Re: tg862
thanks!! will check.. anyway please, make us the video, you're the master on this..
btw there's 14 pins jtag and what looks like a serial connection (4 pins) already soldered, do you know something about it?
see: https://ibb.co/PYTTQWg
My Best Regards
Who is online
Users browsing this forum: No registered users and 2 guests