i have here 4 fully bricked ER-X, i.e. no Bootloader or Stage1 code (= RAM initialization) is loaded.
u-Link NT detects hardware, but not flash:
Code: Select all
-detect
IDCODE 1762124F
MediaTek MT7621
IMPCODE A0414000
EJTAG V2.6
DMA not supported
Unknown flash type!
Report these values http://www.usbjtag.com/phpbb3 00h,00h,00h,00h
Code: Select all
program
Also, poking values doesn't work:
Code: Select all
-poke bfbf8080 1fbc0001
-peek bfbf8080
Peeked Address=0xBFBF8080 Data=0x00000000
3x with MX30LF2G18AC-TI flash
1x with S34ML02... (Spansion flash)
On all hardware, same problem.
Best regards