Hello i get a new Cisco EPC3208 build date 09/12 modem
the old model has same flash as epc3212 usbjtag regocnice it directly with isp pin.
the new chip set i think there is no support yet for this chip? can you make a support for this chip
25q064a
2346022
http://www.hqew.com/ic/25Q064A.html
Cisco EPC3208 ,Unknown flash type?
Moderator: justsomeguy
-
- Junior Member
- Posts: 33
- Joined: Fri Jul 04, 2008 12:32 am
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Same as any other SPI Flash, Like SB6120 or UBEE its an 8MB Flash and USBJTAG NT can read and program this No Problem.mrazzido123 wrote:Hello i get a new Cisco EPC3208 build date 09/12 modem
the old model has same flash as epc3212 usbjtag regocnice it directly with isp pin.
the new chip set i think there is no support yet for this chip? can you make a support for this chip
25q064a
2346022
http://www.hqew.com/ic/25Q064A.html
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 33
- Joined: Fri Jul 04, 2008 12:32 am
hey i soldered same but , usbjtagnt says unknown flash typ .
i can read the 8mb but when i want write , it doenst work.
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 20,ba,17
-flshdct 0
ok thx i did it .
i add the ids to the flash.xml.
i can read the 8mb but when i want write , it doenst work.
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 20,ba,17
-flshdct 0
ok thx i did it .
i add the ids to the flash.xml.
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
This will be of no problem. I will get back to you with newer XML.mrazzido123 wrote:hey i soldered same but , usbjtagnt says unknown flash typ .
i can read the 8mb but when i want write , it doenst work.
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 20,ba,17
-flshdct 0
ok thx i did it .
i add the ids to the flash.xml.
I might latter create a video showing how to create new flash type.
-
- Junior Member
- Posts: 33
- Joined: Fri Jul 04, 2008 12:32 am
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
<flash>
<id1>0x20</id1>
<id2>0xBA</id2>
<id3>0x17</id3>
<name>25Q064A</name>
<size>0x800000</size>
<protocol>0</protocol>
<block>
<secnum>128</secnum>
<secsize>0x10000</secsize>
</block>
</flash>
Add these to your flash.xml.
I found one little bug with create new flash id in xml. I will fix it and upload 0.63 and then make a video how to create new type of flash within software.
<id1>0x20</id1>
<id2>0xBA</id2>
<id3>0x17</id3>
<name>25Q064A</name>
<size>0x800000</size>
<protocol>0</protocol>
<block>
<secnum>128</secnum>
<secsize>0x10000</secsize>
</block>
</flash>
Add these to your flash.xml.
I found one little bug with create new flash id in xml. I will fix it and upload 0.63 and then make a video how to create new type of flash within software.
Who is online
Users browsing this forum: No registered users and 13 guests