301.10 no model and sw version error
-
- Junior Member
- Posts: 70
- Joined: Wed Feb 11, 2009 3:32 pm
301.10 no model and sw version error
i read both tsop of 301.10 with usb jtag and opened in flashedit i dont see model # and sw version in the filelds?
-
- Junior Member
- Posts: 70
- Joined: Wed Feb 11, 2009 3:32 pm
here is a out put it didnt detect the flas type.do i need to edit config?
Copyright (C) 2010,2011,2012
USB JTAG NT 0.43
Target: DP301-010
-detect
IDCODE 5400006D
LSI SC2000
IMPCODE 01B71700
EJTAG V2.6
DMA supoorted
Found Address= 9fc00000 AMD 29lv160DB
Found Address= 9fe00000 AMD 29lv160DB
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,0000
Copyright (C) 2010,2011,2012
USB JTAG NT 0.43
Target: DP301-010
-detect
IDCODE 5400006D
LSI SC2000
IMPCODE 01B71700
EJTAG V2.6
DMA supoorted
Found Address= 9fc00000 AMD 29lv160DB
Found Address= 9fe00000 AMD 29lv160DB
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,0000
-
- Junior Member
- Posts: 8979
- Joined: Mon Jul 18, 2005 9:33 pm
Can you post the xml file?bittug wrote:here is a out put it didnt detect the flas type.do i need to edit config?
Copyright (C) 2010,2011,2012
USB JTAG NT 0.43
Target: DP301-010
-detect
IDCODE 5400006D
LSI SC2000
IMPCODE 01B71700
EJTAG V2.6
DMA supoorted
Found Address= 9fc00000 AMD 29lv160DB
Found Address= 9fe00000 AMD 29lv160DB
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,0000
-
- Junior Member
- Posts: 8979
- Joined: Mon Jul 18, 2005 9:33 pm
I have not tested this box with NT software. Maybe I need to find the box from the closet and test again. Sorry I need to travel and may not have time to test this box for two weeks.bittug wrote:DP301-010DishIrdEJTAGLittle0xBE2500005Yes00x80020000Ram00x800000000x800000U2310x9FC000000x200000U2210x9FE000000x1F0000Eeprom20x00x800
-
- Junior Member
- Posts: 8979
- Joined: Mon Jul 18, 2005 9:33 pm
The known issues now isbittug wrote:sure thanks
"getram" for eeprom will not work if you read all. If you read 256 bytes at a time it will work.
For EEPROM you have to use 6M clock or less to program.
I will send you a test load once I build a newer one before I officially upload. I will also test 013 this time since it might also be broken.
Who is online
Users browsing this forum: No registered users and 2 guests