programar todo al dvi
Moderator: elkora
-
- Junior Member
- Posts: 108
- Joined: Fri Apr 07, 2006 1:27 pm
programar todo al dvi
Para programar el Boot .
Para programar el boot es necesario leer el altera con el byteblaster .
1.- leer el altera y hacer copia de seguridad
2. borrar el altera observaras que el usbjtag no te detecta la flash .
3. Puente ha realizar
1.- LA PATILLA 6 CON LA 25
2.- LA PATILLA 15 CON LA 22
4.- Ahora ya te detecta la flash y le has quitado la proteccion al boot
5.- program boot y cmpram boot todo ok
6.-luego program el app quitando el perro guardian y la nvram .
7.- luego apagas deco quitas puentes y vuelves a programar el altera sino el deco no enciende
http://img12.imageshack.us/my.php?image=altera.jpg
http://img12.imageshack.us/img12/7160/altera.jpg
Para programar el app
Primero quitar el quitar el perro guaridan
http://img12.imageshack.us/img12/6870/l ... blesch.jpg
http://img12.imageshack.us/img12/4794/l ... isable.jpg
http://img12.imageshack.us/img12/9089/i ... achdog.jpg
http://img12.imageshack.us/my.php?image ... achdog.jpg
Tambien se puede utilizar estos scripts
// ******************************
// DVI3000 Change Firmware Script
// ******************************
detect
ldram 9fc20000 %1
Program 9fc20000 e0000
//echo 1 Block 9fc20000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
Program 9fd00000 80000
//echo 1 Block 9fc40000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
Program 9fd80000 80000
//echo 1 Block 9fc60000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
Program 9fe00000 80000
//echo 1 Block 9fc80000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
//echo All Blocks Programed
pause
program 9fe80000 80000
//echo 1 Block 9fc20000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
Program 9ff00000 80000
//echo 1 Block 9fc40000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
Program 9ff80000 80000
//echo 1 Block 9fc60000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
//echo All Blocks Programed
NVRAM y PPv
// **************************
// Dvi3000 clrppv
// **************************
detect
getram nvram
f 9f02b28c 40 0
f 9f016090 80 0
setram nvram
reset
La nvram no tiene proteccion setram nvram
SOLO BORRA LOS PPV DE LA NVRAM PERO SUBE AL XC NO LO BORRA DEL XC
*.-Como hacer que no te actualice el dvi .(unidad fake por hadware)
Hay 2 metodos .
este es el mas seguro pero no probado
http://img260.imageshack.us/img260/6858 ... prueba.jpg
y este es el que esta probado y funciona pero no es lo correcto
http://img245.imageshack.us/img245/6514/3120patita.jpg
http://img245.imageshack.us/my.php?image=3120patita.jpg
MENUS OCULTOS DEL XC
Para entrar al xc se hace de la siguiente manera:
1.- METODO
Con el dvi encendido cogemos el mando y apretamos el boton de apagado y enseguida el ok y parece el menu oculto .
2.- METODO
El dvi quitado de la corriente apretas la flescha de arriba y le pones el cable de corriente y te aparece
.-- DENTRO DEL MENU OCULTO AHI OTRO
.- Para entrar al otro menu debe tocar en el mando la tecla ¡
1.- 4960
2.- 5632
Esta foto es de un dvi activado a todo
http://img245.imageshack.us/img245/7098/xcsinua.jpg
El ippv esta en yes esta activado
el ippv pone no esta desactivado
EN LOS FIRWARE NUEVOS ESTA DESACTIVADO EL TELNET PERO EN LOS ANTERIORES SI EL MODO DE ENTRAR ES ASI:
****************************************************
Comandos Telnet para el Decoder DVI3000 de Motorola.
****************************************************
Conexion por telnet:telnet (ip_decoder)
Login: agentsmith101
Password: v612qaY=dc7@42
Antes de nada activaremos el Modo supervisor con el comando 'enable'.
DVi>enable
Nos pedira un password.
Password: Serp@e:2RdF!SH
Despues podemos ver la lista de comandos con '?'.
DVi>?
show --Show system information
set --Set system parameter
clear --Clear system parameters and logs
enable --Enable supervisor mode
exit --Terminate connection
video --Video Diagnostics
Cada comando de estos tiene subcomandos que podremos ver poniendo una '?' despues de cada comando.
DVi>show ?
summary --Settop summary status
version --Software version information
currchan --Current channel information
cainfo --Conditional Access information
mcprov --MediaCipher provisioning information
firmware --Factory programmed firmware data
general --General configuration information
time --Time information
ib --Inband signal status
ibconfig --Inabnd configuration
oob --Out-of-band signal status
oobconfig --Out-of-band configuration
tcpip --Settop TCP/IP configuration
cmstatus --Cable Modem status
cmtcpip --Cable Modem TCP/IP configuration
downstream --Cable Modem downstream signal status
upstream --Cable Modem upstream signal status
usbdevice --USB Device list
starvue --StarVue configuration
syserror --SysError log
eventlog --Event log
exception --Exception log
dbgzone --Debug Zone settings
memdbg --Memory Debug settings
avstatus --Audio and Video status
Ejemplos: DVi>show version
DVi>show tcpip
DVi>set ?
dbgzone --Set Debug Zone
DVi>clear ?
syserror --Clear SysError log
eventlog --Clear Event log
exception --Clear Exception log
dbgzone --Clear Debug Zone
DVi>enable ?
Already in Supervisor mode
DVI>exit ? --Terminate connection
DVi>video ?
status --Read Video data and write to NVM
restart --Restart Video decoder
dumplog --Dump logged video data in NVM
clearlog --Clear logged video data in NVM
dumpraw --Dump Raw video log data in NVM
PUERTO SERIE YO TAMBIEN TENGO EL DCT PORT CONTROL PERO HACE LO MISMO
http://img245.imageshack.us/img245/944/dviport.jpg
http://img245.imageshack.us/my.php?image
Yo pienso que la base esta en este conector.
*.- En el firware 00.00 de los dvi sale esto :
BOOTROM.NEEDS UPGRADE ....YES.INSERT PASSCARD.THEN PRESS OK ....NO .NO UPGRADE NEEDED...DONE....UPGRADING BOOTROM ....SUCCESS.BOOTROM UPGRADED....FAILURE.ERROR UPGRADING BOOTROM.REGISTER ACCESS (Serial Port)...PRESS SELECT TO ACCESS REGISTERS....PRESS MENU TO EXIT..ACCESSING REGISTERS VIA SERIAL PORT.....
Use the following command to ACCESS REGISTERS.....
<address> and <value> are in hex.
<number> is in decimal.....
mb <address> # manipulate BYTE at <address>...
mw <address> # manipulate WORD at <address>...
ml <address> # manipulate LONG at <address>.......
rb <address> # read BYTE at <address>.....
rw <address> # read WORD at <address>.....
rl <address> # read LONG at <address>.....
wb <address> <value> # write BYTE at <address>....
ww <address> <value> # write WORD at <address>....
wl <address> <value> # write LONG at <address>....
dr <address> <number> # dump <number> of bytes from register at <address>......
h # display this help menu.....
q # exit to MTC menu.......
The following command is currently available...... <value> is in hex..... <value>
# change register value to <value>....
i # increase register value.....
k # decrease register value.....
[ # decrease register address...
] # increase register address.......
h # display this help menu......
q # exit to previous menu.......
$ ... ......Exits and returns to MTC menu.
Pero yo le meti el DCT port control y no me salia nada puede se por que me falte algo mas pero pone por serie .
El señor usbjtag a puesto en la seccion de descarga 2 firwares el 00.00 y el 16.21 el cual tiene telnet activado.
TODO ESTO SE LO TENEMOS QUE AGRADECER A :
HAUTE , ANDRONT , MUCHAS GRACIAS AMIGOS
PD. Hay un firware spilog que captura comandos a ver si podemos fabricar un comando
Para programar el boot es necesario leer el altera con el byteblaster .
1.- leer el altera y hacer copia de seguridad
2. borrar el altera observaras que el usbjtag no te detecta la flash .
3. Puente ha realizar
1.- LA PATILLA 6 CON LA 25
2.- LA PATILLA 15 CON LA 22
4.- Ahora ya te detecta la flash y le has quitado la proteccion al boot
5.- program boot y cmpram boot todo ok
6.-luego program el app quitando el perro guardian y la nvram .
7.- luego apagas deco quitas puentes y vuelves a programar el altera sino el deco no enciende
http://img12.imageshack.us/my.php?image=altera.jpg
http://img12.imageshack.us/img12/7160/altera.jpg
Para programar el app
Primero quitar el quitar el perro guaridan
http://img12.imageshack.us/img12/6870/l ... blesch.jpg
http://img12.imageshack.us/img12/4794/l ... isable.jpg
http://img12.imageshack.us/img12/9089/i ... achdog.jpg
http://img12.imageshack.us/my.php?image ... achdog.jpg
Tambien se puede utilizar estos scripts
// ******************************
// DVI3000 Change Firmware Script
// ******************************
detect
ldram 9fc20000 %1
Program 9fc20000 e0000
//echo 1 Block 9fc20000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
Program 9fd00000 80000
//echo 1 Block 9fc40000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
Program 9fd80000 80000
//echo 1 Block 9fc60000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
Program 9fe00000 80000
//echo 1 Block 9fc80000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
//echo All Blocks Programed
pause
program 9fe80000 80000
//echo 1 Block 9fc20000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
Program 9ff00000 80000
//echo 1 Block 9fc40000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
Program 9ff80000 80000
//echo 1 Block 9fc60000 Programed.
//echo Press enter when Debug mode is (off) to program nest block, any other character with return exit the script.
pause
//echo All Blocks Programed
NVRAM y PPv
// **************************
// Dvi3000 clrppv
// **************************
detect
getram nvram
f 9f02b28c 40 0
f 9f016090 80 0
setram nvram
reset
La nvram no tiene proteccion setram nvram
SOLO BORRA LOS PPV DE LA NVRAM PERO SUBE AL XC NO LO BORRA DEL XC
*.-Como hacer que no te actualice el dvi .(unidad fake por hadware)
Hay 2 metodos .
este es el mas seguro pero no probado
http://img260.imageshack.us/img260/6858 ... prueba.jpg
y este es el que esta probado y funciona pero no es lo correcto
http://img245.imageshack.us/img245/6514/3120patita.jpg
http://img245.imageshack.us/my.php?image=3120patita.jpg
MENUS OCULTOS DEL XC
Para entrar al xc se hace de la siguiente manera:
1.- METODO
Con el dvi encendido cogemos el mando y apretamos el boton de apagado y enseguida el ok y parece el menu oculto .
2.- METODO
El dvi quitado de la corriente apretas la flescha de arriba y le pones el cable de corriente y te aparece
.-- DENTRO DEL MENU OCULTO AHI OTRO
.- Para entrar al otro menu debe tocar en el mando la tecla ¡
1.- 4960
2.- 5632
Esta foto es de un dvi activado a todo
http://img245.imageshack.us/img245/7098/xcsinua.jpg
El ippv esta en yes esta activado
el ippv pone no esta desactivado
EN LOS FIRWARE NUEVOS ESTA DESACTIVADO EL TELNET PERO EN LOS ANTERIORES SI EL MODO DE ENTRAR ES ASI:
****************************************************
Comandos Telnet para el Decoder DVI3000 de Motorola.
****************************************************
Conexion por telnet:telnet (ip_decoder)
Login: agentsmith101
Password: v612qaY=dc7@42
Antes de nada activaremos el Modo supervisor con el comando 'enable'.
DVi>enable
Nos pedira un password.
Password: Serp@e:2RdF!SH
Despues podemos ver la lista de comandos con '?'.
DVi>?
show --Show system information
set --Set system parameter
clear --Clear system parameters and logs
enable --Enable supervisor mode
exit --Terminate connection
video --Video Diagnostics
Cada comando de estos tiene subcomandos que podremos ver poniendo una '?' despues de cada comando.
DVi>show ?
summary --Settop summary status
version --Software version information
currchan --Current channel information
cainfo --Conditional Access information
mcprov --MediaCipher provisioning information
firmware --Factory programmed firmware data
general --General configuration information
time --Time information
ib --Inband signal status
ibconfig --Inabnd configuration
oob --Out-of-band signal status
oobconfig --Out-of-band configuration
tcpip --Settop TCP/IP configuration
cmstatus --Cable Modem status
cmtcpip --Cable Modem TCP/IP configuration
downstream --Cable Modem downstream signal status
upstream --Cable Modem upstream signal status
usbdevice --USB Device list
starvue --StarVue configuration
syserror --SysError log
eventlog --Event log
exception --Exception log
dbgzone --Debug Zone settings
memdbg --Memory Debug settings
avstatus --Audio and Video status
Ejemplos: DVi>show version
DVi>show tcpip
DVi>set ?
dbgzone --Set Debug Zone
DVi>clear ?
syserror --Clear SysError log
eventlog --Clear Event log
exception --Clear Exception log
dbgzone --Clear Debug Zone
DVi>enable ?
Already in Supervisor mode
DVI>exit ? --Terminate connection
DVi>video ?
status --Read Video data and write to NVM
restart --Restart Video decoder
dumplog --Dump logged video data in NVM
clearlog --Clear logged video data in NVM
dumpraw --Dump Raw video log data in NVM
PUERTO SERIE YO TAMBIEN TENGO EL DCT PORT CONTROL PERO HACE LO MISMO
http://img245.imageshack.us/img245/944/dviport.jpg
http://img245.imageshack.us/my.php?image
Yo pienso que la base esta en este conector.
*.- En el firware 00.00 de los dvi sale esto :
BOOTROM.NEEDS UPGRADE ....YES.INSERT PASSCARD.THEN PRESS OK ....NO .NO UPGRADE NEEDED...DONE....UPGRADING BOOTROM ....SUCCESS.BOOTROM UPGRADED....FAILURE.ERROR UPGRADING BOOTROM.REGISTER ACCESS (Serial Port)...PRESS SELECT TO ACCESS REGISTERS....PRESS MENU TO EXIT..ACCESSING REGISTERS VIA SERIAL PORT.....
Use the following command to ACCESS REGISTERS.....
<address> and <value> are in hex.
<number> is in decimal.....
mb <address> # manipulate BYTE at <address>...
mw <address> # manipulate WORD at <address>...
ml <address> # manipulate LONG at <address>.......
rb <address> # read BYTE at <address>.....
rw <address> # read WORD at <address>.....
rl <address> # read LONG at <address>.....
wb <address> <value> # write BYTE at <address>....
ww <address> <value> # write WORD at <address>....
wl <address> <value> # write LONG at <address>....
dr <address> <number> # dump <number> of bytes from register at <address>......
h # display this help menu.....
q # exit to MTC menu.......
The following command is currently available...... <value> is in hex..... <value>
# change register value to <value>....
i # increase register value.....
k # decrease register value.....
[ # decrease register address...
] # increase register address.......
h # display this help menu......
q # exit to previous menu.......
$ ... ......Exits and returns to MTC menu.
Pero yo le meti el DCT port control y no me salia nada puede se por que me falte algo mas pero pone por serie .
El señor usbjtag a puesto en la seccion de descarga 2 firwares el 00.00 y el 16.21 el cual tiene telnet activado.
TODO ESTO SE LO TENEMOS QUE AGRADECER A :
HAUTE , ANDRONT , MUCHAS GRACIAS AMIGOS
PD. Hay un firware spilog que captura comandos a ver si podemos fabricar un comando
-
- Junior Member
- Posts: 108
- Joined: Fri Apr 07, 2006 1:27 pm
elkora me gustria subir unos firware para los dvi de varias versiones que tengo y de varios modelos si puedes nos podemos agregar y te paso los firware y los subes y siento no saber poner la fotos de otra forma.
Ya ha ouesto usbjtag en la seccion de descarga 2 firware el 00.00 y el 16.21 con telnet
Un saludo
Ya ha ouesto usbjtag en la seccion de descarga 2 firware el 00.00 y el 16.21 con telnet
Un saludo
-
- Junior Member
- Posts: 1
- Joined: Sun May 10, 2009 9:31 am
byteblaster
Podria alguien aclararme que es el byblaster porfa?
-
- Junior Member
- Posts: 108
- Joined: Fri Apr 07, 2006 1:27 pm
El dvi3020 para poder programar el boot necesitamos desproteger la flash , y se hace haciendo los puentes en el altera . Si quieres programar el firware entonces quitas el perroguardian , la nvram no tien proteccion.
El xc no encuentro el datasheet y mira que me lo han buscado en china y tampoc el datasheet del BCN7115 que es el procesador que lleva .
Un saludo .
El xc no encuentro el datasheet y mira que me lo han buscado en china y tampoc el datasheet del BCN7115 que es el procesador que lleva .
Un saludo .
-
- Junior Member
- Posts: 4
- Joined: Wed Feb 13, 2008 7:24 am
borrar ppv
Hola saludos a todos,por favoralguien me puede aclarar como borrrar los ppv´s.gracias
-
- Junior Member
- Posts: 108
- Joined: Fri Apr 07, 2006 1:27 pm
Hola pues los ppv se almacenan en dos sitios en el xc y en la nvram.
En el XC no podemos borrarlos y el limite esta a los 20 compras.
En la nvram si podemos borrarlos y hacer que no te los cobren pero cuando el xc se llene (20 creditos) se bloqueara. aqui te dejo el scrip . Un saludo
// **************************
// Dvi3000 clrppv
// **************************
getram nvram
f 9f02b28c 40 0
f 9f016090 80 0
setram nvram
reset
En el XC no podemos borrarlos y el limite esta a los 20 compras.
En la nvram si podemos borrarlos y hacer que no te los cobren pero cuando el xc se llene (20 creditos) se bloqueara. aqui te dejo el scrip . Un saludo
// **************************
// Dvi3000 clrppv
// **************************
getram nvram
f 9f02b28c 40 0
f 9f016090 80 0
setram nvram
reset
-
- Junior Member
- Posts: 205
- Joined: Wed Dec 06, 2006 8:18 pm
Aqui les dejo la info basica del Byteblaster desde el manual hasta los diagramas para hacerlo y como queda despues de Terminado el mismo , tambien lo pueden comprar hecho que lo venden varios sitios ya hecho:
http://img140.imageshack.us/img140/7936/37905701.jpg
http://img37.imageshack.us/img37/5570/32727064.jpg
http://img404.imageshack.us/img404/8506/indexjk.jpg
http://img64.imageshack.us/img64/8398/52537787.jpg
http://img140.imageshack.us/img140/7936/37905701.jpg
http://img37.imageshack.us/img37/5570/32727064.jpg
http://img404.imageshack.us/img404/8506/indexjk.jpg
http://img64.imageshack.us/img64/8398/52537787.jpg
You do not have the required permissions to view the files attached to this post.
mirando
Who is online
Users browsing this forum: No registered users and 3 guests