Informaci?n DVI 3000
Moderator: elkora
-
- Junior Member
- Posts: 381
- Joined: Fri Oct 28, 2005 8:43 am
If you can telnet to the box this would likely indicate its a unix based implementation and you have an access password that appears to be a backdoor left in the firmware code. You can access the kernel! Yes it it limited but you can create files and code. Is there a shell available? What commands have you tried other than what you listed?
This password is probably used in many models that are like the DVI series.
Why would Motorola have left telnet access to the unit with a very secure userid and password? Something is in there thats important to the box.
This password is probably used in many models that are like the DVI series.
Why would Motorola have left telnet access to the unit with a very secure userid and password? Something is in there thats important to the box.
-
- Junior Member
- Posts: 80
- Joined: Mon Jan 09, 2006 9:31 am
Tienes que intentar que el ordenador o el router de una ip al deco por dhcp.
En mi caso lo hace el router, dando una ip al ordenador (192.168.1.2) y otra al deco (192.168.1.3).
Esto lo puedes ver en el menu secreto del router, en la configuracion del Network.
Pero vamos mas sencillo es hacer un Telnet 192.168.1.3 y te respondera con Login: si esta todo correcto.
En mi caso lo hace el router, dando una ip al ordenador (192.168.1.2) y otra al deco (192.168.1.3).
Esto lo puedes ver en el menu secreto del router, en la configuracion del Network.
Pero vamos mas sencillo es hacer un Telnet 192.168.1.3 y te respondera con Login: si esta todo correcto.
-
- Junior Member
- Posts: 80
- Joined: Mon Jan 09, 2006 9:31 am
Here are the commands for a telnet session of dvi3000
Aqui estan los comandos para la conexion telnet con el dvi3000
Espero que report?is vuestros avances con ello.
I hope that you report your advances with it.
****************************************************
Comandos Telnet para el Decoder DVI3000 de Motorola.
****************************************************
Conexion por telnet:telnet (ip_decoder)
Login: agentsmith101
Password: v612qaY=dc7@42
Antes de nada activaremos el Modo supervisor con el comando 'enable'.
DVi>enable
Nos pedira un password.
Password: Serp@e:2RdF!SH
Despues podemos ver la lista de comandos con '?'.
DVi>?
show --Show system information
set --Set system parameter
clear --Clear system parameters and logs
enable --Enable supervisor mode
exit --Terminate connection
video --Video Diagnostics
Cada comando de estos tiene subcomandos que podremos ver poniendo una '?' despues de cada comando.
DVi>show ?
summary --Settop summary status
version --Software version information
currchan --Current channel information
cainfo --Conditional Access information
mcprov --MediaCipher provisioning information
firmware --Factory programmed firmware data
general --General configuration information
time --Time information
ib --Inband signal status
ibconfig --Inabnd configuration
oob --Out-of-band signal status
oobconfig --Out-of-band configuration
tcpip --Settop TCP/IP configuration
cmstatus --Cable Modem status
cmtcpip --Cable Modem TCP/IP configuration
downstream --Cable Modem downstream signal status
upstream --Cable Modem upstream signal status
usbdevice --USB Device list
starvue --StarVue configuration
syserror --SysError log
eventlog --Event log
exception --Exception log
dbgzone --Debug Zone settings
memdbg --Memory Debug settings
avstatus --Audio and Video status
Ejemplos: DVi>show version
DVi>show tcpip
DVi>set ?
dbgzone --Set Debug Zone
DVi>clear ?
syserror --Clear SysError log
eventlog --Clear Event log
exception --Clear Exception log
dbgzone --Clear Debug Zone
DVi>enable ?
Already in Supervisor mode
DVI>exit ? --Terminate connection
DVi>video ?
status --Read Video data and write to NVM
restart --Restart Video decoder
dumplog --Dump logged video data in NVM
clearlog --Clear logged video data in NVM
dumpraw --Dump Raw video log data in NVM
Aqui estan los comandos para la conexion telnet con el dvi3000
Espero que report?is vuestros avances con ello.
I hope that you report your advances with it.
****************************************************
Comandos Telnet para el Decoder DVI3000 de Motorola.
****************************************************
Conexion por telnet:telnet (ip_decoder)
Login: agentsmith101
Password: v612qaY=dc7@42
Antes de nada activaremos el Modo supervisor con el comando 'enable'.
DVi>enable
Nos pedira un password.
Password: Serp@e:2RdF!SH
Despues podemos ver la lista de comandos con '?'.
DVi>?
show --Show system information
set --Set system parameter
clear --Clear system parameters and logs
enable --Enable supervisor mode
exit --Terminate connection
video --Video Diagnostics
Cada comando de estos tiene subcomandos que podremos ver poniendo una '?' despues de cada comando.
DVi>show ?
summary --Settop summary status
version --Software version information
currchan --Current channel information
cainfo --Conditional Access information
mcprov --MediaCipher provisioning information
firmware --Factory programmed firmware data
general --General configuration information
time --Time information
ib --Inband signal status
ibconfig --Inabnd configuration
oob --Out-of-band signal status
oobconfig --Out-of-band configuration
tcpip --Settop TCP/IP configuration
cmstatus --Cable Modem status
cmtcpip --Cable Modem TCP/IP configuration
downstream --Cable Modem downstream signal status
upstream --Cable Modem upstream signal status
usbdevice --USB Device list
starvue --StarVue configuration
syserror --SysError log
eventlog --Event log
exception --Exception log
dbgzone --Debug Zone settings
memdbg --Memory Debug settings
avstatus --Audio and Video status
Ejemplos: DVi>show version
DVi>show tcpip
DVi>set ?
dbgzone --Set Debug Zone
DVi>clear ?
syserror --Clear SysError log
eventlog --Clear Event log
exception --Clear Exception log
dbgzone --Clear Debug Zone
DVi>enable ?
Already in Supervisor mode
DVI>exit ? --Terminate connection
DVi>video ?
status --Read Video data and write to NVM
restart --Restart Video decoder
dumplog --Dump logged video data in NVM
clearlog --Clear logged video data in NVM
dumpraw --Dump Raw video log data in NVM
-
- Junior Member
- Posts: 32
- Joined: Wed Nov 01, 2006 7:34 am
haute, to be able to connect with telnet through router. direct with the PC I have still not obtained it. activate; Seth dbgzone 0, 1, 2 and when he activates zone 2, atravez of telnet me salia mensage taskmon: watchdog toggled. and when I made clear dbgzone 2 volvio to normal state.
haute, conseguir conectar con telnet atraves de un router. directo con el pc no lo he conseguido todavia.
active; set dbgzone 0 ,1, 2 y cuando active zone 2, atravez de telnet me salia
el mensage taskmon: watchdog toggled.
y cuando hice clear dbgzone 2 volvio a estado normal.
haute, conseguir conectar con telnet atraves de un router. directo con el pc no lo he conseguido todavia.
active; set dbgzone 0 ,1, 2 y cuando active zone 2, atravez de telnet me salia
el mensage taskmon: watchdog toggled.
y cuando hice clear dbgzone 2 volvio a estado normal.
-
- Junior Member
- Posts: 80
- Joined: Mon Jan 09, 2006 9:31 am
-
- Junior Member
- Posts: 32
- Joined: Wed Nov 01, 2006 7:34 am
haute, te puedes poner en contacto, para intercambiar conocimientos
[email protected]
[email protected]
-
- Junior Member
- Posts: 4
- Joined: Mon Jan 15, 2007 12:42 am
Hola a tod@s, yo tambien ando investigando en esto, desentra?ando el dump de la flahs me he encontrado aon otro login:
login: motonet
pass: 6408D+mot*9
he estado haciendo pruebas pero nada de nada, a ver si entre todos le damos utilidad a este pass, igual no sirve para nada que igual sirve para activar el cm del deco.
login: motonet
pass: 6408D+mot*9
he estado haciendo pruebas pero nada de nada, a ver si entre todos le damos utilidad a este pass, igual no sirve para nada que igual sirve para activar el cm del deco.
-
- Junior Member
- Posts: 4
- Joined: Mon Jan 15, 2007 12:42 am
Who is online
Users browsing this forum: No registered users and 2 guests