need help to debrick wrt54g v1.1
-
- Junior Member
- Posts: 70
- Joined: Wed Feb 11, 2009 3:32 pm
need help to debrick wrt54g v1.1
guys i couldnt run new software on xp and couldnt load driver on windows 7 so i am using 0.40 old software tring to debrick wrt54g v1 heres mu out put
Copyright (C) 2010,2011,2012
USB JTAG NT 0.40d
Target: WRT54G4M
-detect
IDCODE 0535217F
Broadcom BCM5352
IMPCODE 00800904
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 K8D1716UB
Found Address= 9fff0000 K8D1716UB
-tap c
Eco :00000000
-tap ffffffff
Eco :00000000
-erase cfe
Use DETECT to detect the flash type
Copyright (C) 2010,2011,2012
USB JTAG NT 0.40d
Target: WRT54G4M
-detect
IDCODE 0535217F
Broadcom BCM5352
IMPCODE 00800904
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 K8D1716UB
Found Address= 9fff0000 K8D1716UB
-tap c
Eco :00000000
-tap ffffffff
Eco :00000000
-erase cfe
Use DETECT to detect the flash type
-
- Junior Member
- Posts: 8962
- Joined: Mon Jul 18, 2005 9:33 pm
Try to install VC2005 patch or install yahoo messenger as suggested to see if you can run newer software.bittug wrote:guys i couldnt run new software on xp and couldnt load driver on windows 7 so i am using 0.40 old software tring to debrick wrt54g v1 heres mu out put
Copyright (C) 2010,2011,2012
USB JTAG NT 0.40d
Target: WRT54G4M
-detect
IDCODE 0535217F
Broadcom BCM5352
IMPCODE 00800904
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 K8D1716UB
Found Address= 9fff0000 K8D1716UB
-tap c
Eco :00000000
-tap ffffffff
Eco :00000000
-erase cfe
Use DETECT to detect the flash type
The flash problem is you must have select the wrong target. You need to know what size of flash and then select the proper target. There is no V1.1 in the xml but there is WRT54G 2M/4M/8M. Select the target based on your flash size.
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Just Try each One. If you Know Flash Number You can Use GOOGLE And Find PDF And Find out all the Flash Info You Need. Not difficult at all.bittug wrote:how do i find out flash size?i did install yahoo messanger but still same problem when would you be on line?
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 8962
- Joined: Mon Jul 18, 2005 9:33 pm
Read the flash label and it will tell you the size.bittug wrote:how do i find out flash size?i did install yahoo messanger but still same problem when would you be on line?
This is what I see
http://en.wikipedia.org/wiki/Linksys_WRT54G_series
1.1 Broadcom BCM4710 @ 125 MHz 16 MB 4 MB CDF2
CDF3 12 V
1 A Front panel LEDs reduced to eight (one link/activity LED per port, plus one each for power, wireless, DMZ and WAN/Internet connectivity). Wireless chipset is integrated onto motherboard.
Should be 4M.
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Do you Need a Tutorial On How to Use GOOGLE? First Try And Look. Now we Know It's a 16M Bit. How Hard was THAT? Here I even Downloaded the DataSheet for you.bittug wrote:yes it has 8 lights and flash is samsung 625 k8d17bcpi07
googled it didnt get any thing. also tried all the options.didnt get any thing
Datasheet
K8D1716UB - 16M Bit (2M x8/1M x16) Dual Bank NOR Flash Memory - Samsung semiconductor
You do not have the required permissions to view the files attached to this post.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 8962
- Joined: Mon Jul 18, 2005 9:33 pm
Who is online
Users browsing this forum: No registered users and 7 guests