wrt160 nl brick

This is JTAG to debrick any JTAG device. Modem, cable boxes, dish boxes routers.
eragonz
Posts: 166
Joined: Mon Feb 25, 2008 7:08 pm

Target: WRT160NL

Post by eragonz » Thu Dec 10, 2015 8:41 pm

Copyright (C) 2010-2015
USB JTAG NT 0.76
Target: WRT160NL
-detect
IDCODE 00000001
Atheros
IMPCODE 60414000
EJTAG V2.6
DMA not supported
Found Address= 9f800000 MX25L6405D

usbbdm
Posts: 8628
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm » Fri Dec 11, 2015 9:03 am

eragonz wrote:Copyright (C) 2010-2015
USB JTAG NT 0.76
Target: WRT160NL
-detect
IDCODE 00000001
Atheros
IMPCODE 60414000
EJTAG V2.6
DMA not supported
Found Address= 9f800000 MX25L6405D
This is good sign it can be fixed with USB JTAG NT.

eragonz
Posts: 166
Joined: Mon Feb 25, 2008 7:08 pm

Post by eragonz » Fri Dec 11, 2015 1:16 pm

Copyright (C) 2010-2015
USB JTAG NT 0.76
Target: WRT160NL
-detect
IDCODE 00000001
Atheros
IMPCODE 60414000
EJTAG V2.6
DMA not supported
Found Address= 9f800000 MX25L6405D
-tap c
Eco :00000000
-tap a ffffffff
Eco :08C00440
-ldram cfe
C:/Users/Public/Desktop/USBJTAG NT/9f000000.bin loaded
-erase cfe
Erase starts...
Erase time 00:00:01 (.140)
-sprogram cfe


all the time stays that way

Koevoet
Posts: 298
Joined: Sat Nov 18, 2006 8:29 am

Post by Koevoet » Fri Dec 11, 2015 1:50 pm

Why are you using the tap c and tap a commands when you already have a flash detection ?

Use the command "program" to get trap on and then program as normal

Regards

usbbdm
Posts: 8628
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm » Fri Dec 11, 2015 2:11 pm

eragonz wrote:Copyright (C) 2010-2015
USB JTAG NT 0.76
Target: WRT160NL
-detect
IDCODE 00000001
Atheros
IMPCODE 60414000
EJTAG V2.6
DMA not supported
Found Address= 9f800000 MX25L6405D
-tap c
Eco :00000000
-tap a ffffffff
Eco :08C00440
-ldram cfe
C:/Users/Public/Desktop/USBJTAG NT/9f000000.bin loaded
-erase cfe
Erase starts...
Erase time 00:00:01 (.140)
-sprogram cfe


all the time stays that way
Try to use cmpram to confirm you have CFE programmed properly. Then use fast mode to program the rest.

eragonz
Posts: 166
Joined: Mon Feb 25, 2008 7:08 pm

Post by eragonz » Fri Dec 11, 2015 2:37 pm

-cmpram cfe
Time 00:00:15 (.962)
Compare data Failed address 9F800000,target 10,PC memory FF

eragonz
Posts: 166
Joined: Mon Feb 25, 2008 7:08 pm

Post by eragonz » Fri Dec 11, 2015 2:41 pm

Copyright (C) 2010-2015
USB JTAG NT 0.76
Target: WRT160NL
-detect
IDCODE 00000001
Atheros
IMPCODE 60414000
EJTAG V2.6
DMA not supported
Found Address= 9f800000 MX25L6405D
-program
C:/Users/Public/Desktop/USBJTAG NT/backup.bin loaded
-program 9f800000 800000
Erase starts...

usbbdm
Posts: 8628
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm » Fri Dec 11, 2015 10:57 pm

Watch this

eragonz
Posts: 166
Joined: Mon Feb 25, 2008 7:08 pm

Post by eragonz » Sun Dec 13, 2015 7:08 pm

-detect
IDCODE 00000001
Atheros
IMPCODE 60414000
EJTAG V2.6
DMA not supported
Found Address= 9f800000 MX25L6405D
C:/Users/Public/Desktop/USBJTAG NT/code.bin loaded
-program 9f800000 800000
Erase starts...

all time please help

usbbdm
Posts: 8628
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm » Mon Dec 14, 2015 9:29 am

What is your time zone? Find me in irc and I can take a look.

eragonz
Posts: 166
Joined: Mon Feb 25, 2008 7:08 pm

Time Zone

Post by eragonz » Mon Dec 14, 2015 12:56 pm

Monday
12/14/2015
4:55 PM
AST

Puerto Rico
is in the
Atlantic Time Zone

eragonz
Posts: 166
Joined: Mon Feb 25, 2008 7:08 pm

Post by eragonz » Tue Dec 15, 2015 8:38 pm

Koevoet wrote:Why are you using the tap c and tap a commands when you already have a flash detection ?

Use the command "program" to get trap on and then program as normal

Regards
okok umm use debuse on oh off !!

Koevoet
Posts: 298
Joined: Sat Nov 18, 2006 8:29 am

Post by Koevoet » Wed Dec 16, 2015 10:09 am

eragonz wrote:okok umm use debuse on oh off !!
Don't really understand what you meant to say here . but if Usbbdm is not able to help you out , it might be better to connect direct to the spi flash itself and program the chip that way.

Regards

eragonz
Posts: 166
Joined: Mon Feb 25, 2008 7:08 pm

Post by eragonz » Wed Dec 16, 2015 4:08 pm

help please :confused:

usbbdm
Posts: 8628
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm » Wed Dec 16, 2015 7:01 pm

eragonz wrote:help please :confused:
Like I said find me in irc and I can help you remotely.

Post Reply