not sure about the part numbers (will update the thread once i find the numbers).. i want to dump and flash the eeprom
ps: the circled chip is an ATMEL 24C02C which is used for the edid that i dont need to access.. im trying to dump/flash the flash/epprom but only image i could find had this
pcb:
im trying to modify the flash/osd to edit the gamemode crosshairs which im hoping are just stored as images
Asus vg248qe
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
You want to program EEPROM? I think NT should be able to support it. Have not tested this for a lone time.dreamss wrote:not sure about the part numbers (will update the thread once i find the numbers).. i want to dump and flash the eeprom
ps: the circled chip is an ATMEL 24C02C which is used for the edid that i dont need to access.. im trying to dump/flash the flash/epprom but only image i could find had this
pcb:
im trying to modify the flash/osd to edit the gamemode crosshairs which im hoping are just stored as images
-
- Junior Member
- Posts: 76
- Joined: Mon Feb 25, 2008 3:40 pm
found a similar monitr with same scaler and pannel
scalar: MST8556T
aparently need to use ddc to flash monitors.. need more research and apropiate service manual
ftp://210.65.248.224/LCD%20Monitor/Docu ... LB.QBE.pdf
Flash-ROM stores source code and MCU (embedded in Scalar) offers H/W DDC2Bi
function & controls system processing. EEPROM is stored DDC data, OSD common data
and user mode data.
) MCU embedded in Scalar: Control unit, it controls all the functions of this interface board,
just like the OSD display setting, the adjustable items, adjusted data storage, the external
IIC communication, support DDC2Bi. .
another similar mon ftp://210.65.248.224/LCD%20Monitor/Docu ... 1.S11).pdf
scalar: MST8556T
aparently need to use ddc to flash monitors.. need more research and apropiate service manual
ftp://210.65.248.224/LCD%20Monitor/Docu ... LB.QBE.pdf
Flash-ROM stores source code and MCU (embedded in Scalar) offers H/W DDC2Bi
function & controls system processing. EEPROM is stored DDC data, OSD common data
and user mode data.
) MCU embedded in Scalar: Control unit, it controls all the functions of this interface board,
just like the OSD display setting, the adjustable items, adjusted data storage, the external
IIC communication, support DDC2Bi. .
another similar mon ftp://210.65.248.224/LCD%20Monitor/Docu ... 1.S11).pdf
-
- Junior Member
- Posts: 76
- Joined: Mon Feb 25, 2008 3:40 pm
turns out the monitors have i2c.... which can be used to flash edid and flash
http://www.blaicher.com/2012/06/howto-f ... pirate-v4/
http://www.blaicher.com/2012/06/howto-f ... pirate-v4/
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Why don't you Use PonyProg? Its a Great tool for reading and writing to EEPROMS. Even though Like USBBDM said, NT should be able to do it as well, but not a bad Idea to have more than one Option.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Have you tried to use NT to program this EEPROM chip?dreamss wrote:turns out the monitors have i2c.... which can be used to flash edid and flash
http://www.blaicher.com/2012/06/howto-f ... pirate-v4/
Who is online
Users browsing this forum: No registered users and 1 guest