Here is how to program sb5101. I do not know the reason yet. When I know I will fix it in latter release.
The reason is that after the "detect" the DEBUG status is ON!!. You have to power off/ on the modem to have the debug back to off. So when "Program" command is sent you need to see debug off!!.
Here is how to program the sb5101.
1. type detect
2. Power off/on the modem. (You should see the debug status is off now).
3. load the code (ldram )
4. issue the program command.
This works on software 0.05. Happy testing!!
Workaround to program sb5101.
-
- Junior Member
- Posts: 79
- Joined: Fri Jul 28, 2006 11:57 am
- Location: Bahamas
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
-
- Junior Member
- Posts: 79
- Joined: Fri Jul 28, 2006 11:57 am
- Location: Bahamas
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Confirmed by a member who use the JTAG to program sb5101 with 0.05 software.
If you use script add the following line after each "detect"
"poke ff300000 1a"
If you manually program, when you see "DEBUG ON" after "detect" type "poke ff300000 1a" this way you do not need to power off/on the modem to program. (The work around). 0.06 will allow you config it so no need to manually or script add this line.
If you use script add the following line after each "detect"
"poke ff300000 1a"
If you manually program, when you see "DEBUG ON" after "detect" type "poke ff300000 1a" this way you do not need to power off/on the modem to program. (The work around). 0.06 will allow you config it so no need to manually or script add this line.
Who is online
Users browsing this forum: No registered users and 6 guests