elproducto wrote:Not sure if I missed something or I am doing something wrong. I followed your directions but get an error when trying to program firmware.
I type
"-program 9fc00000"
then get
Can not find the memory in the configuration
I then enter
"-program 9fc00000 200000" I get
Erase starts...
but just hangs there.
I think I am getting lost after I program boot. Am i supposed to unplog the modem or not. I currently am not unplugging the modem after programing the the boot and move on to the next step.
If you Can't Detect the Flash You won't be able to Debrick the Modem.
And Commands Should be
ldram 9fc00000
sprogram 9fc00000 200000
With out the-
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
It does detect the modem right up until after I program the boot loader. I will try the commands your recommended and I will report my findings. Thanks for the help
I used the commands you posted and my modem is still not functioning. It comes on when initially plugged in but does not stay lite up. I issued the following commands, after trying what buzzybuzzard suggested that did not work for me.
If first select Allflash for range.
-detect
IDCODE 0334817F
Broadcom BCM3348
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 Intel 28F160C3B
-tap C
Eco :00000000
-tap a ffffffff
Eco :04C12000
-erase 9fc00000 200000
Erase starts...
Erase time 00:00:18 (.101)
-peek 9fc00000
Peeked Address=0x9FC00000 Data=0xFFFFFFFF
-erase 9fc00000 200000
Erase starts...
Erase time 00:00:18 (.086)
-detect
IDCODE 0334817F
Broadcom BCM3348
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 Intel 28F160C3B
-ldram boot
C:/Users/K/Downloads/SB5100MoD.1.0.4.Beta/SB5100MoD.1.0.4.Beta/SIGMAX-BL_v2.6-LITE.bin loaded
-erase boot
Erase starts...
Erase time 00:00:00 (.698)
-sprogram boot
Program Starts...
Program speed 1.16 KB/s
Program time 00:00:28 (.174)
Program pass, if no further programming needed, power off/on the target(DID NOT POWER OFF)
-ldram 9fc00000
C:/Users/K/Desktop/cm/1/9fc00000.bin loaded
-sprogram 9fc00000 200000
Program Starts...
Program speed 1.13 KB/s
Program time 00:30:57 (.801)
Program pass, if no further programming needed, power off/on the target
-cmpram 9fc00000 200000
Time 00:11:19 (.812)
Compare data OK
This indicate you have programmed modem.
But if the firmware you programmed is not right it will not work.
If the modem is damaged it will not work also.
Are you sure you have programmed the original backup?
elproducto wrote:I used the commands you posted and my modem is still not functioning. It comes on when initially plugged in but does not stay lite up. I issued the following commands, after trying what buzzybuzzard suggested that did not work for me.
If first select Allflash for range.
-detect
IDCODE 0334817F
Broadcom BCM3348
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 Intel 28F160C3B
-tap C
Eco :00000000
-tap a ffffffff
Eco :04C12000
-erase 9fc00000 200000
Erase starts...
Erase time 00:00:18 (.101)
-peek 9fc00000
Peeked Address=0x9FC00000 Data=0xFFFFFFFF
-erase 9fc00000 200000
Erase starts...
Erase time 00:00:18 (.086)
-detect
IDCODE 0334817F
Broadcom BCM3348
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 Intel 28F160C3B
-ldram boot
C:/Users/K/Downloads/SB5100MoD.1.0.4.Beta/SB5100MoD.1.0.4.Beta/SIGMAX-BL_v2.6-LITE.bin loaded
-erase boot
Erase starts...
Erase time 00:00:00 (.698)
-sprogram boot
Program Starts...
Program speed 1.16 KB/s
Program time 00:00:28 (.174)
Program pass, if no further programming needed, power off/on the target(DID NOT POWER OFF)
-ldram 9fc00000
C:/Users/K/Desktop/cm/1/9fc00000.bin loaded
-sprogram 9fc00000 200000
Program Starts...
Program speed 1.13 KB/s
Program time 00:30:57 (.801)
Program pass, if no further programming needed, power off/on the target
-cmpram 9fc00000 200000
Time 00:11:19 (.812)
Compare data OK
DUDE Why are You Using the SIGMA BOOTLOADER????????????????????????
SB5100MOD Does Not Need the BOOTLOADER.
Program Stock flash to Modem, Then Program the SB5100MOD Firmware ONLY.
Do you have TeamView????
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."