4100 firmware question

GHOST · Post by **GHOST** » Thu Dec 25, 2008 4:43 pm

i have a working 4101 and a 4100 with hack.i also have a new 4100 that im tring to flash.i read the flash of the the 2 hacked modems but when i flah it to the factory 4100 it won't connect.all i get is power on and recieve flashing.i tried net boot at first but and won't finish the proses.inside the new 4100 there is a sticker that reads sb4100 W/ALPS and it has an inel flash chip.the other 4100 with hack has a sticker reading sb4100i with a toshiba flash chip.i've been at it for days now and need some help.anysuggestion will be more than welcomed,thax

GHOST · Post by **GHOST** » Thu Dec 25, 2008 5:00 pm

is there a way to flash just the 800 kb firmware and not the whole 2 mb flash using the jtag?

Post by **usbbdm** » Thu Dec 25, 2008 8:03 pm

USe USB JTAG NT you can program by blocks giving start address and length.

GHOST · Post by **GHOST** » Fri Dec 26, 2008 2:48 pm

i have a usb jtag i don't know if it's an NT.i've tried using a script in the def file called
sb4100parts and after, all the modem does is rapid reboots,had to flash back to factory to get back to norm.

Blob · Post by **Blob** » Tue Feb 10, 2009 8:51 am

usbbdm wrote:USe USB JTAG NT you can program by blocks giving start address and length.

What would the start address & end address be for these on the SB4xxx modems... I notice your guides for SB4xxx modems show just how to do 2mb dumps and none show how to do just firmware...

tecnicasopr · Post by **tecnicasopr** » Sat Feb 14, 2009 12:02 am

Please somebody post the start address & end address for the SB4100 firmware...

4100 firmware question

4100 firmware question

Who is online