IDCODE 0334517F
Broadcom BCM3345
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 1808,08f8
The Flash Chip says Malaysia 29LV160TE-70PFTN. Cant flash the modem....Any help will be greatly appreciated. Thank you in advance.
SB4200 Unknown Flash Type
-
- Junior Member
- Posts: 15
- Joined: Sun Jan 13, 2008 4:09 pm
Still not detecting the flash....Koevoet wrote:When you start the NT application , before you do anything type speed 2 in the bottom window and press enter , then try a detection.
Regards
Copyright http://www.usbjtag.com 2008,2009,2010
USB JTAG NT 0.32
-speed 2
-detect
IDCODE 0334517F
Broadcom BCM3345
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 1808,08f8
-
- Junior Member
- Posts: 8978
- Joined: Mon Jul 18, 2005 9:33 pm
The value you get is NOT flash value and added to it will not help you.
It all depends on how the modem is bricked. If the modem is only soft bricked, then it will be easy. Otherwise check the hardware. I have seen people messing around the flash with solders and try to use JTAG to debrick and of course it will not work. What those values says is you have problem writing to the flash.
It all depends on how the modem is bricked. If the modem is only soft bricked, then it will be easy. Otherwise check the hardware. I have seen people messing around the flash with solders and try to use JTAG to debrick and of course it will not work. What those values says is you have problem writing to the flash.
Who is online
Users browsing this forum: No registered users and 3 guests