SB4200 or SB4100 doesn't start up? resq4x00.usp

[bbb]

resq4x00.usp

Code: Select all

detect
//(Select the backed up file)
ldram 9fc00000
poke fffe230c 3
poke fffe2304 0
poke fffe2300 a
poke fffe2300 9
poke fffe2300 9
poke fffe2300 9
poke fffe2300 9
poke fffe2300 9
poke fffe2300 9
poke fffe2300 9
poke fffe2300 9
poke fffe2300 1c
program 9fc00000 200000
cmpram 9fc00000 200000

Found by USBBDM! Keep up the great work!


BBB

[exxpecial]

-resq4x00
-detect
IDCODE 334517F
Broadcom BCM3345
IMPCODE 800908
DMA supoorted
Unknown flash type!
Report these two value to [email protected] 0000,0000

my cm is sb4200i....flash is FUJITSU MBM29LV160T ....

I am going crazy...Any clue...Of do I eat to begin to reanimate him???

thanzs

[usbbdm]

-resq4x00
-detect
IDCODE 334517F
Broadcom BCM3345
IMPCODE 800908
DMA supoorted
Unknown flash type!
Report these two value to [email protected] 0000,0000

my cm is sb4200i....flash is FUJITSU MBM29LV160T ....

I am going crazy...Any clue...Of do I eat to begin to reanimate him???

thanzs

If you have use the latest software and latest def file, the only explanation is that you have programmed a bad firmware. If the flash is empty you should be able to get the right flash type. There is another possibility is that your board is a little different than what I have tested. If you do not mind setup VNC and yahoo messenger and I can take a look. Support this flash is not a problem.

[exxpecial]

thanzs......the new version.... usbjtag 0.13......is very fast...reanimed....4xxx dead...thanzs...thanzs

[blowhard7]

Still having a problem with two SB4100's. First one is a 4100 revision A with a Toshiba TC58FVT160FT-85 flash chip:

-detect
IDCODE 335017F
Broadcom BCM3350
IMPCODE 8009E8
DMA supoorted
Unknown flash type!
Report these two value to [email protected] 0098,00c2

Second is a 4100 with an Intel TE28F160 flash chip. The flash chip may be bad in this one?? Not sure.

-detect
IDCODE 335017F
Broadcom BCM3350
IMPCODE 8009E8
DMA supoorted
Unknown flash type!
Report these two value to [email protected] ffff,ffff

Using USBJTAG version 0.13.

[exxpecial]

He tries to write it...Only ... in the eyelash of flash.....With write...The 12684 first bytes of a fullflash or bootloader........With the blackcat...reboot cm....And next the usbjtag connects ......To me has recovered me to life two 4200.

A greeting

[usbbdm]

Still having a problem with two SB4100's. First one is a 4100 revision A with a Toshiba TC58FVT160FT-85 flash chip:

-detect
IDCODE 335017F
Broadcom BCM3350
IMPCODE 8009E8
DMA supoorted
Unknown flash type!
Report these two value to [email protected] 0098,00c2

Second is a 4100 with an Intel TE28F160 flash chip. The flash chip may be bad in this one?? Not sure.

-detect
IDCODE 335017F
Broadcom BCM3350
IMPCODE 8009E8
DMA supoorted
Unknown flash type!
Report these two value to [email protected] ffff,ffff

Using USBJTAG version 0.13.

First one just add one line in flash.def. Add these two lines to your flash.def
0x0098,0x00c2,TC58FVT160 ,0x200000,0,31,0x10000,1,0x8000,2,0x2000,1,0x4000,
0x0098,0x0043,TC58FVB160 ,0x200000,0,1,0x4000,2,0x2000,1,0x8000,31,0x10000


Second one I need to see. Please setup VNC and use yahoo messenger.