NetGear Wireless Cable Modem Gateway
-
- Junior Member
- Posts: 161
- Joined: Mon Apr 16, 2007 5:04 pm
ok guys got it to work only on usb only no ip addrees on ethernet dont know about wireless because i dont have a computer with wifi when i program sgb900 BPI OK+Consola.bin i can get online change mac and config through telnet but i cant seem to get into the router this modem has been configured by comcast and i cant get rid of there settings when i connect to
192.168.100.1 i get the comcast Device Information page login comcast password 1234 ive tried 192.168.0.1 nothing
it seem theres somwere in the flash that isnt getting programed or this is a permanent setting ive tried eraseing the the boot and sprograming it still nothing anbody got any ideas???
192.168.100.1 i get the comcast Device Information page login comcast password 1234 ive tried 192.168.0.1 nothing
it seem theres somwere in the flash that isnt getting programed or this is a permanent setting ive tried eraseing the the boot and sprograming it still nothing anbody got any ideas???
-
- Junior Member
- Posts: 161
- Joined: Mon Apr 16, 2007 5:04 pm
-
- Junior Member
- Posts: 8978
- Joined: Mon Jul 18, 2005 9:33 pm
Netgear CG814EG V2.
This modem uses BCM3349. The configuration is the same as SGB900.
-detect
IDCODE 0334917F
Broadcom BCM3349
IMPCODE 00800904
DMA supoorted
Found Address= 9fc00000 Intel 28F640J3
If anyone interested I can post pictures on the main page.
-detect
IDCODE 0334917F
Broadcom BCM3349
IMPCODE 00800904
DMA supoorted
Found Address= 9fc00000 Intel 28F640J3
If anyone interested I can post pictures on the main page.
-
- Junior Member
- Posts: 192
- Joined: Mon Oct 13, 2008 5:33 pm
- Location: Jamaica
Cable Modem Tools
These are some great cable modem tools, excellent tools.. Check them out..
http://rapidshare.com/files/85342882/Wi ... .part2.rar
http://rapidshare.com/files/93138052/Wi ... .part1.rar
http://rapidshare.com/files/85342882/Wi ... .part2.rar
http://rapidshare.com/files/93138052/Wi ... .part1.rar
Let's Share Info & Crack the XC Together
-
- Junior Member
- Posts: 146
- Joined: Fri Sep 30, 2005 4:17 pm
CG814WG V2
UJmodem detects and reads and will verify.Any write function bricks modem.Use method
below to debrick.
detect
IDCODE 0334917F
Broadcom BCM3349
IMPCODE 00800904
DMA supoorted
Found Address= 9fc00000 Intel 28F640J3
getram 9fc00000 400000
-ERASE 9FC00000 400000
Erase starts...
Erase time 00:00:21 (.843)
-LDRAM 9FC00000
-SPROGRAM 9FC00000 400000
Program Starts...
Program speed 49.60 KB/s
Program time 00:01:24 (.703)
Program pass, if no further programming needed, power off/on the target
Above gets the modem back but does not write App.
Did this to get back to stock.
-LDRAM 9FC00000 (backup)
-PROGRAM 9FC00000 400000
Erase starts...
Erase time 00:00:22 (.609)
Program speed 324.99 KB/s
Program time 00:00:12 (.515)
Program pass, if no further programming needed, power off/on the target
Edited the backup,found original mac 13 times in cfg.Changed to good working mac
and wrote back to modem.
Modem will not aquire downstream and gives mac as 00 09 5b de ad 01(not mac I used)
sbg900 noshell also bricks modem.
UJmodem detects and reads and will verify.Any write function bricks modem.Use method
below to debrick.
detect
IDCODE 0334917F
Broadcom BCM3349
IMPCODE 00800904
DMA supoorted
Found Address= 9fc00000 Intel 28F640J3
getram 9fc00000 400000
-ERASE 9FC00000 400000
Erase starts...
Erase time 00:00:21 (.843)
-LDRAM 9FC00000
-SPROGRAM 9FC00000 400000
Program Starts...
Program speed 49.60 KB/s
Program time 00:01:24 (.703)
Program pass, if no further programming needed, power off/on the target
Above gets the modem back but does not write App.
Did this to get back to stock.
-LDRAM 9FC00000 (backup)
-PROGRAM 9FC00000 400000
Erase starts...
Erase time 00:00:22 (.609)
Program speed 324.99 KB/s
Program time 00:00:12 (.515)
Program pass, if no further programming needed, power off/on the target
Edited the backup,found original mac 13 times in cfg.Changed to good working mac
and wrote back to modem.
Modem will not aquire downstream and gives mac as 00 09 5b de ad 01(not mac I used)
sbg900 noshell also bricks modem.
-
- Junior Member
- Posts: 146
- Joined: Fri Sep 30, 2005 4:17 pm
-
- Junior Member
- Posts: 146
- Joined: Fri Sep 30, 2005 4:17 pm
Yes I understand this and I know full well that I could brick the modem,but bricking a modem is not really a concern.If you look at the quote why would it be said to use UJmodem.My intention was just gather some more understanding.usbbdm wrote:I found one CG814W v2. Use UJmodem, select SGB900, I can get the mac and eth address. No further testing on this modem.
Who is online
Users browsing this forum: No registered users and 1 guest