Guia del menu oculto de la DCT 700 !!!!

JTAG NT for cable box
Locked
hqa18
Junior Member
Posts: 205
Joined: Wed Dec 06, 2006 8:18 pm

Guia del menu oculto de la DCT 700 !!!!

Post by hqa18 »

Bueno aqui les dejo unas fotos de el menu oculto de otro companero !!!!

Espero las fotos aclaren dudas de algunos relacionado al menu oculto de la dct 700

ENCIENDEN >>> APAGAN >>> SELECT (una sola vez)

Y les aparece este MENU:
http://imageshack.us/photo/my-images/18 ... 47in2.jpg/

01 General Status
http://img183.imageshack.us/my.php?imag ... 012mi9.jpg

02 OOB Status
http://img183.imageshack.us/my.php?imag ... 013ce1.jpg

03 In Band Status
http://img148.imageshack.us/my.php?imag ... 014pu9.jpg

05 Unit Address
http://img148.imageshack.us/my.php?imag ... 016zh5.jpg

07 Current Channel Status ( aqui en esta opcion es que pueden verificar el Type : Digital de la caja en esta caja esta en 40 , de estar activa estuviera en 12 ,,,
http://img183.imageshack.us/my.php?imag ... 018hx8.jpg

08 Renewable Security
http://img183.imageshack.us/img183/115/ ... qm3.th.jpg

Nota: Para entrar deben de encender la caja , luego de encendida la apagan con el boton de power y cuando undan ese boton de inmediato le dan al boton de OK 2 ocaciones y entonses entra al menu,,,,,,,
mirando
hqa18
Junior Member
Posts: 205
Joined: Wed Dec 06, 2006 8:18 pm

Menu del menu de diagnostico detallado

Post by hqa18 »

Aqui le pondre el menu de diagnostico del D ct700 en detalles ariba tienen las imagenes aqui la informacion:

Using Diagnostics

To access and navigate the diagnostics using the Motorola universal remote control:
1 Press POWER to turn on the set-top.
2 Wait five seconds and then press POWER again to turn off the set-top.
3 To enable diagnostic mode, press OK within two seconds after powering off. The
DIAGNOSTICS main menu is displayed on the OSD:

DIAGNOSTICS
01 GENERAL STATUS
02 OOB STATUS
03 IN BAND STATUS
04 AUDIO/VIDEO STATUS
05 UNIT ADDRESS
06 FIRMWARE VERSION
07 CURRENT CHANNEL STATUS
08 RENEWABLE SECURITY
09 UPSTREAM MODEM
10 APP CODE MODULES
11 MEMORY CONFIG
12 INTERACTIVE INFO
13 MAC FREQUENCY TABLE
14 CONTROL CHANNELS
15 MESSAGE TYPES
16 IN BAND PAT
17 IN BAND PMT
18 TASK STATUS
19 USB STATUS
20 IB MCA STATUS
21 KEYBOARD / LED

4 Use the CHANNEL or cursor keys to select the desired diagnostic.
5 Press cursor <, cursor >, ENTER, or OK to run the selected diagnostic.
6 To exit the diagnostic mode, press POWER on the remote control. The set-top exits the
diagnostic mode and powers off.

Seguir segundo post:
mirando
hqa18
Junior Member
Posts: 205
Joined: Wed Dec 06, 2006 8:18 pm

Post by hqa18 »

The complete list of remote control buttons you can use to navigate the diagnostics is:

Button Function using the diagnostics main menu Function using a diagnostic
POWER Exits diagnostic mode and enters OFF state Exits diagnostic mode and enters OFF state
CH/CUR +,
CURSOR UP
Moves the cursor up Displays the DIAGNOSTICS main menu
CH/CUR - ,
CURSOR DOWN
Moves the cursor down Displays the DIAGNOSTICS main menu
CURSOR RIGHT,
CURSOR LEFT,
OK, ENTER
Runs the selected diagnostic Displays the DIAGNOSTICS main menu
GUIDE None None
MENU None None
INFO None None

**************************General Status******************************

d 01: General Status

This diagnostic displays the error code, a short description of the error, the purchase count, and specific model information:

DCT700 STATUS
ERROR : E 00
NO ERROR
PURCHASES : 0
Platform ID: : 0x0060
Family ID : 0x0000
Model ID : 0x008F
TUNER : tuner type
Remod Channel : 3
Time Zone
(hhhhhhhh) MMMM min
DS Entry Time
1/1/1999 00:00 GMT
DS Exit Time
1/1/1999 00:00 GMT
Current GPS Time
1/1/1999 00:00 GMT

The General Status fields are:

Field Description
Error Codes A sequence of LED flashes communicates errors when they occur. The Error Code field displays the code for the active error when appropriate.
Purchases Indicates the number of unreported purchases.
Platform ID A 16-bit hexadecimal number used to differentiate between digital platform images in the field. It is also called the ROM ID.
Family ID A hexadecimal number that indicates the set-top manufacturer and product family.Model ID A hexadecimal number that indicates the set-top model.
Tuner Indicates the tuner type.Remod Channel The Remod Channel can be 3 or 4 (NA systems). The output port configuration displays the configuration of the set-top output or re-modulated (remod) port. The output port/remod port is the interface from the set-top to the subscriber TV. Time Zone Indicates the time zone offset (in minutes) relative to GMT.

DS Entry Time Indicates the daylight savings entry time.
DS Exit Time Indicates the daylight savings exit time.
Current GPS Time Indicates the current time.
mirando
hqa18
Junior Member
Posts: 205
Joined: Wed Dec 06, 2006 8:18 pm

Post by hqa18 »

******************d 02: Out-of-Band (OOB) Status **********************

This diagnostic indicates the status of the out-of-band control channel.

OOB DIAGNOSTIC
DATA * SNR 23 dB GOOD
EMM DATA *
CARRIER LOCK YES COUNT 1
HUNT MODE None
CUR FREQ
LKC
EMM PRVDR ID 0x0001

___________________________________________________________
The OOB Diagnostic fields are:
Field Description
Data The OSD indicates with a &#147;*&#148; that data has been received. The indicators cover all packet processors regardless of which stream they are monitoring and are cleared when you enter the diagnostic.

EMM Data Indicates whether the set-top is receiving a message on the EMM stream:
Blank No data received.
* Data received. The set-top can receive only 12 PIDs at once. Data on PIDs
can be present on the out-of-band multiplex that the set-top is not receiving.
Carrier Lock The CARRIER LOCK is reset to &#147;1&#148; after an initialization from the DAC 6000 or a power cycle. Each time the set-top detects a drop in OOB connectivity, the counter increments.

The following Carrier Lock variables can display:
YES Carrier locked
NO Carrier unlocked
Hunt Mode Indicates the state of OOB stream acquisition. The Hunt Mode can be:
None The set-top is locked to an OOB carrier.
RR (Round Robin)
The set-top is searching OOB frequencies trying to find an EMM Provider of
0 or 1.
EMM - The set-top received a Provider ID change and is searching OOB
frequencies for the new ID.
FIX - The set-top has been commanded to attempt to lock onto a frequency.
SRCH - The set-top at some point had a valid Provider ID on the OOB frequency
and is attempting to re-acquire it.
CUR - Freq Indicates the current out-of-band frequency.
LKC - Indicates the last known carrier (OOB frequency that had correct Provider ID).
EMM - Provider ID The ID of the provider of the Entitlement Management Message (EMM).

********************Seguimos mas adelante aqui mismo con todo detallado**********************
mirando
justsomeguy
Junior Member
Posts: 1417
Joined: Wed Jan 28, 2009 4:01 pm

Post by justsomeguy »

great post !

eveyone can benefit from this info.
live your life like a beer commericial
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

justsomeguy wrote:great post !

eveyone can benefit from this info.
Look Here to Download Full Manual. ;)

http://www.secable.com/files/dct700.pdf
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
hqa18
Junior Member
Posts: 205
Joined: Wed Dec 06, 2006 8:18 pm

Post by hqa18 »

********************Selecting the OOB Frequency *************************
\
To select the OOB frequency:
1 From the OOB STATUS diagnostic, press MENU on the remote control to enter the
frequency selection mode. The OSD displays a new MANUAL FREQ line at the bottom of
the screen, indicating the LKC frequency.

2 Press MENU a second time to exit the frequency change mode.
Or
Press the CHANNEL or cursor keys to scroll through the frequencies to locate the desired
OOB frequency. The frequency selection appears on the MANUAL FREQ line of the OSD.
The first frequency to display is 75.25. The system scrolls through each frequency until it
reaches the last, 103.75, and then scrolls back to the beginning. This diagnostic scrolls
through the OOB frequencies in the following order:

! 75.25 MHz
! 104.20 MHz
! 72.75 MHz
! 92.25 MHz
! 98.25 MHz
! 107.25 MHz
! 107.40 MHz
! 110.25 MHz
! 116.25 MHz
! 103.75 MHz

3 Press SELECT to begin searching for the OOB frequency.
On the OSD the MANUAL FREQ line of text clears, the HUNT MODE displays FIX to
indicate the fixed frequency search, and the CUR FREQ field changes to the frequency
selected to search.

If the frequency is found with the proper EMM Provider ID, the OSD LKC field changes to
display the new frequency.
If after 40 seconds the frequency search is not successful, the set-top performs a warm reset and returns to the last known carrier frequency.
4 To abort a search without waiting the 40 seconds, press POWER to cause a warm reset.
mirando
hqa18
Junior Member
Posts: 205
Joined: Wed Dec 06, 2006 8:18 pm

**********In-band Status **********

Post by hqa18 »

In-band Status

This diagnostic displays for the last attempted channel tune. If a digital carrier is not present,
the diagnostics indicate the carrier lock is analog. When the carrier lock is analog, all fields for digital (other than a carrier lock channel) are blank.

IN BAND DIAGNOSTIC
DATA *
EMM DATA *
CARRIER LOCK YES
PCR LOCK YES
SNR 36 dB ssss
MODULATION MODE QAM 64
SHORT TERM ERROR COUNT 0000
LONG TERM ERROR COUNT 9999
TUNED FREQ 543.000

The In-band Diagnostic fields are:
Field Description
Data Activity
Indicator

Lights when the set-top is receiving data on the in-band channels. The indicator covers all
packet processors regardless of which stream they are monitoring. The following variables
can display:
Blank No data received
* Data received

EMM Data Indicator
Lights when the set-top is receiving a message on the EMM stream. The indicator is clear
when entering this diagnostic. The following variables can display:
Blank No data received
* Data received

Carrier Lock Indicates that the digital in-band receiver is locked to the carrier with the following variables:
YES Carrier locked
NO Carrier unlocked
Analog Analog channel

PCR Lock Indicates a program-clock-reference lock with the current digital data stream.
SNR Displays an estimate of the carrier signal-to-noise ratio. The SNR displayed is a measure of the QAM cluster variance, which is proportional to the SNR.
Analog channels display analog for carrier lock. The SNR displays a number for the
numeric value and blank for the ssss value.

The following variables can display:
Blank The digital section is still in the initial state. If this occurs, check diagnostic d07.
GOOD Good value
FAIR Marginal signal level; check the signal
POOR Unusable signal

Modulation
Mode
Indicates the modulation mode &#151; QAM 64 or QAM 256

Field Description
Short Term - Indicates the FEC errors (maximum count of 65535) at 5-second intervals. The Short Term
Error Count - Error Count is cleared after polling.
Long Term - Indicates the accumulation of the Short Term Error Count (maximum count of 65535).
Error Count - The Long Term Error Count is cleared every 24 hours.
Tuned Frequency - Indicates the actual frequency the tuner is programmed (Carrier Definition Frequency
mirando
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

hqa18 wrote:In-band Status

This diagnostic displays for the last attempted channel tune. If a digital carrier is not present,
the diagnostics indicate the carrier lock is analog. When the carrier lock is analog, all fields for digital (other than a carrier lock channel) are blank.

IN BAND DIAGNOSTIC
DATA *
EMM DATA *
CARRIER LOCK YES
PCR LOCK YES
SNR 36 dB ssss
MODULATION MODE QAM 64
SHORT TERM ERROR COUNT 0000
LONG TERM ERROR COUNT 9999
TUNED FREQ 543.000

The In-band Diagnostic fields are:
Field Description
Data Activity
Indicator

Lights when the set-top is receiving data on the in-band channels. The indicator covers all
packet processors regardless of which stream they are monitoring. The following variables
can display:
Blank No data received
* Data received

EMM Data Indicator
Lights when the set-top is receiving a message on the EMM stream. The indicator is clear
when entering this diagnostic. The following variables can display:
Blank No data received
* Data received

Carrier Lock Indicates that the digital in-band receiver is locked to the carrier with the following variables:
YES Carrier locked
NO Carrier unlocked
Analog Analog channel

PCR Lock Indicates a program-clock-reference lock with the current digital data stream.
SNR Displays an estimate of the carrier signal-to-noise ratio. The SNR displayed is a measure of the QAM cluster variance, which is proportional to the SNR.
Analog channels display analog for carrier lock. The SNR displays a number for the
numeric value and blank for the ssss value.

The following variables can display:
Blank The digital section is still in the initial state. If this occurs, check diagnostic d07.
GOOD Good value
FAIR Marginal signal level; check the signal
POOR Unusable signal

Modulation
Mode
Indicates the modulation mode — QAM 64 or QAM 256

Field Description
Short Term - Indicates the FEC errors (maximum count of 65535) at 5-second intervals. The Short Term
Error Count - Error Count is cleared after polling.
Long Term - Indicates the accumulation of the Short Term Error Count (maximum count of 65535).
Error Count - The Long Term Error Count is cleared every 24 hours.
Tuned Frequency - Indicates the actual frequency the tuner is programmed (Carrier Definition Frequency
I already Posted the Direct link to entire Manual.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
Locked

Who is online

Users browsing this forum: No registered users and 9 guests