dct1800

[junctionbox]

tried to usbdmnt dct 1800 box went completely dead put nvram blocked uid and applied upm after that unplugged unit and replugged it it was dead normally i will use old usbbdmexec same commands everything come out perfect with this new one theres some flaws that need to be address immediately i know its not me ive programmed hundreds of units and i dont use instructions to program boxes

[usbbdm]

Bot USBBDM and USBBDM NT should do the same work. Nothing huge different other than NT can support mode BDM clock.
I have not tested DCT1800 myself but I am interested how you brick the box. It should never be bricked if you have the right backup. (not like JTAG some device can really be bricked).

[usbbdm]

I found some bugs on USBBDM NT on programming, not sure if it is related you your problem. I will upload 0.10 to solve this issue.

[junctionbox]

sir all i done as i do on usbdmexc reset 1 ,init ldram 200000,setram 200000 40000,getram code flshdct code,program 406000 aa000 getram nvram upm setram nvram these commands i used on the usbdm excnt and it killed my dct1800 the old exc never killed a box at all now to debrick what are the commands to debrick? this debricking is new so please explain in simple terms

[usbbdm]

If you want I can help you with logmein. But have you tried new 0.10 code? It fixed one BDM NT programming issue.

[junctionbox]

Need to know what is debrick is used for on the dct2000 boxes and the commands to use debrick and when you need to debrick a dct2000 box please send me the commands.on the old usbdm exc we never to debrick a box

[UserName]

reset 1
r rpc468
r a7 200400
init
flshdct code
program code/