Dct 2224

Include DCT cable boxes and Starchoice boxes.

Moderator: justsomeguy

Locked
candikel
Junior Member
Posts: 45
Joined: Thu Jan 17, 2008 9:44 am

Dct 2224

Post by candikel »

HI, i can detect the flash, both it is nothing in the front panel look like no power
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

candikel wrote:HI, i can detect the flash, both it is nothing in the front panel look like no power
Yes. When you see BDM ON, you are stopping the CPU and gain full control. After you finished, either give "reset" or remove BDM it will work as normal.
candikel
Junior Member
Posts: 45
Joined: Thu Jan 17, 2008 9:44 am

Post by candikel »

ok. the problem is i type
flshdct code
ldram code
program code

and press Enter after that the BDM go OFF.
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

candikel wrote:ok. the problem is i type
flshdct code
ldram code
program code

and press Enter after that the BDM go OFF.
That is correct. When BDM ON it accept your command. When BDM OF it is doing something and will not accept your command. When it finished the programming it will go back to BDM ON.
candikel
Junior Member
Posts: 45
Joined: Thu Jan 17, 2008 9:44 am

Post by candikel »

ok usbbdm, i did a back up from my dct 2224 utikizing version 0.45
and i dont why but the nvram and the code only have 00 00 00 etc.
and allflash has all data.how can i put allflash in my dct2224 utilizing the
0.45 or the 0.40.Beacause utilizing the 0.45 when i connect the box i receive a messege that says "The dct2224 does not respond the reset properly"

when i use 0.40, i have no problem to work with the box except that i dont have the option to restore the allflash.do you know any comand that i can utilize to restore allflash utilizing the version 0.40.

thank you in advance!
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

candikel wrote:ok usbbdm, i did a back up from my dct 2224 utikizing version 0.45
and i dont why but the nvram and the code only have 00 00 00 etc.
and allflash has all data.how can i put allflash in my dct2224 utilizing the
0.45 or the 0.40.Beacause utilizing the 0.45 when i connect the box i receive a messege that says "The dct2224 does not respond the reset properly"

when i use 0.40, i have no problem to work with the box except that i dont have the option to restore the allflash.do you know any comand that i can utilize to restore allflash utilizing the version 0.40.

thank you in advance!
If you can detect the flash Use this

ldram code
reset 1
init
flshdct code
program code

If that dont work you can try this also

ldram code
reset 1
init
r rpc 468
r a7 200400
flshdct code
program code
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
Locked

Who is online

Users browsing this forum: No registered users and 1 guest