Here is the info from diag menu.
Screen #2
DATA * SNR 24 DB GOOD
EMM DATA *
CARRIER LOCK YES COUNT
HUNT MODE NONE
CUR FREQ 75.25
LKC 75.25
EMM PRVDR ID 0X0001
SCREEN # 9
STATUS: -
FREQUENCY: 11.744
LEVEL : 40
IPPV : ENABLED
13 05-26-08 13:23:41
N/A
SCREEN # 10
ASTB VALD 264 13 720
00C-2500 03.46 ENABLED
TV_GUIDE 78.33 ENABLED
SCV2500_ 06.21 ENABLED
MACGCLNT 34.25 ENABLED
SCREEN # 12
IP : 0.0.0.0
UPM : 0X113279
UPSTREAM ID : 0X0000
DOWNSTREAM ID : 0X0000
STATE : UNCONFIG
MAC ABORT CNTR : 0000
GOOD PACKETS :
ERROR PACKETS :
0 THROUGH 14 ALL UNUSED
any help?
Vod and ppv problem
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
How Much Time Have you given it to Get an IP or Even Download the Guide?????????????ilavu wrote:Here is the info from diag menu.
Screen #2
DATA * SNR 24 DB GOOD
EMM DATA *
CARRIER LOCK YES COUNT
HUNT MODE NONE
CUR FREQ 75.25
LKC 75.25
EMM PRVDR ID 0X0001
SCREEN # 9
STATUS: -
FREQUENCY: 11.744
LEVEL : 40
IPPV : ENABLED
13 05-26-08 13:23:41
N/A
SCREEN # 10
ASTB VALD 264 13 720
00C-2500 03.46 ENABLED
TV_GUIDE 78.33 ENABLED
SCV2500_ 06.21 ENABLED
MACGCLNT 34.25 ENABLED
SCREEN # 12
IP : 0.0.0.0
UPM : 0X113279
UPSTREAM ID : 0X0000
DOWNSTREAM ID : 0X0000
STATE : UNCONFIG
MAC ABORT CNTR : 0000
GOOD PACKETS :
ERROR PACKETS :
0 THROUGH 14 ALL UNUSED
any help?
As Soon as you connect the Box It's not going to GET AN IP.
and 0x0000 on Upstream and Downstream Is not good. Ether not locking Freq Or your not giving It enough Time. If you Have picture then More Likely Your Not giving it enough time.
UPSTREAM ID : 0X0000
DOWNSTREAM ID : 0X0000
STATE : UNCONFIG
This UNCONFIG IS NO GOOD. If that does Not Change you will Have to Flash a Good BackUp to Get out of the UNCONFIG STATE.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 133
- Joined: Mon Feb 08, 2010 9:47 am
-
- Junior Member
- Posts: 449
- Joined: Sat Oct 21, 2006 6:19 am
fresh nvram
Get a fresh nvram but before you get a new nvram goto dia 12 and make sure it doesnt say unconfig before you save such nvram . Your problem lies in the nvram its in unconfig state bud
junctionbox
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Well Here Current firmware is 8.16 for the DCT2224. When I have a Problem I load a 7.96 Firmware BackUp and let it take the Update to 8.16 On its Own. Not Knowing the Original UID is No Problem Becouse Box will go to Original UID on its Own No matter What BackUp I Use.ilavu wrote:The guide loaded about 20 min ago. As for good backup, I let it update by cc. Question is without original backup it will give me all the info needed by updating by cc? This box is previously modified. Does network ID matter? Because I don't have original. State: unconfig any alternate solution?
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
Who is online
Users browsing this forum: No registered users and 1 guest