bdm40 software
-
- Junior Member
- Posts: 16
- Joined: Mon Dec 20, 2010 9:19 pm
bdm40 software
can someone show me where? this works better then 45a on my computer tnanks
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
If you know it works better then you should already have it. Otherwise how can you know it is better. In the download section there is downloadmm00cars wrote:can someone show me where? this works better then 45a on my computer tnanks
http://www.usbjtag.com/vbforum/download ... ile&id=110
I would be interested to see why it is "better" since it should be better on 0.45a no 0.40. The issue could be the installation. You need to be aware you need to have all the needed dlls and also need to install VS2005 patch for some OS. (Windows 7 has it built in).
Run the setup will solve most of the issue (not VS2005).
-
- Junior Member
- Posts: 16
- Joined: Mon Dec 20, 2010 9:19 pm
your right i had it... it worked every time i flshdct, but 45a tells me it cant detect flash and i also like the feature it has when you boot up usbbdm 40 software plug in ird and you get that graph 1-7.one out of 10 tries the 45 will detect flash? i cleaned all my files thats how come i dont have it no more.
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
If flshdct is the issue I will take a look and see if it is the issue with the xml. You guys need to report to the bug area and make it better in newer software not get older software. There will be no improvement for older software. Can you tell me which type of box that only works for 0.40? I will try to find the box and fix that issue.mm00cars wrote:your right i had it... it worked every time i flshdct, but 45a tells me it cant detect flash and i also like the feature it has when you boot up usbbdm 40 software plug in ird and you get that graph 1-7.one out of 10 tries the 45 will detect flash? i cleaned all my files thats how come i dont have it no more.
Please report any issues you think for the newer software !!
-
- Junior Member
- Posts: 47
- Joined: Fri Oct 29, 2010 8:04 pm
menu of script ?
it sounds like he is describing the menu of a script ex) dct700 script
1 backup flash and nvram
2 restore flash and nvram
3 debrick when normal pgm dont work
4 firmware testing
5 exit
1 backup flash and nvram
2 restore flash and nvram
3 debrick when normal pgm dont work
4 firmware testing
5 exit
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
If you have the Script In the Script Folder You canmm00cars wrote:yes how can i get that to work again?thanks
1 = type the script name and Hit enter
OR
2 = Put a Check Mark On Auto Script.
Like USBBDM said. You Should be able to Figure this Out Easily as a Tester. USBBDM is 1000% Correct.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
If box is connected and auto Script checked then when you Open Program it should Auto Detect and Pop Up On Screen. If No Box is connected then Nothing will Come Up.mm00cars wrote:i am a newbie tester to this software and i did check the auto script box but it doesnt pop up on the screen when i boot program........... i appreciate all your help thanks
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
Who is online
Users browsing this forum: No registered users and 9 guests