I have a bricked (powers up and HELLO appears on front screen) DVD Recorder. Can not get anywhere to update, reprogram, or reset.
Any help would be appreciated.
This is the info I've collected so far.
Main Board - MODEL:LVW5006A REV:01
ATmega AT89S52 flash chip
The 10 pin interface on the system board IS A JTAG connector.
Pin 1 is MOSI,
Pin 3 is VDD,
Pin 5 is RST,
Pin 7 is SCK,
Pin 9 is MISO.
Pins 2, 4, 6, 8, and 10 are ground.
Don't have jtag software (ordered USBJTAG)
Can't find Flash software for Gateway AR230 but is a rebadged Liteon 5001-7 board. Gateway only has an EXE file and the unit has to update by DVD drive which is not accessible, or not excepting the flash.
Again, Any help would be appreciated.
Thanks
Bricked Gateway AR230 DVD Recorder - HELP!
-
- Junior Member
- Posts: 1
- Joined: Sun Mar 01, 2009 2:47 am
-
- Junior Member
- Posts: 207
- Joined: Fri Feb 01, 2008 10:20 pm
Re: All 10pin = jtag
Wow!! Thats good to know!! So basically, anytime there is a 10-Pin connector on any circuit boards, they are automatically Jtag connectors? Nice!!!
dyerre2 wrote:I have a bricked (powers up and HELLO appears on front screen) DVD Recorder. Can not get anywhere to update, reprogram, or reset.
Any help would be appreciated.
This is the info I've collected so far.
Main Board - MODEL:LVW5006A REV:01
ATmega AT89S52 flash chip
The 10 pin interface on the system board IS A JTAG connector.
Pin 1 is MOSI,
Pin 3 is VDD,
Pin 5 is RST,
Pin 7 is SCK,
Pin 9 is MISO.
Pins 2, 4, 6, 8, and 10 are ground.
Don't have jtag software (ordered USBJTAG)
Can't find Flash software for Gateway AR230 but is a rebadged Liteon 5001-7 board. Gateway only has an EXE file and the unit has to update by DVD drive which is not accessible, or not excepting the flash.
Again, Any help would be appreciated.
Thanks
-
- Junior Member
- Posts: 268
- Joined: Sat Jun 07, 2008 2:56 pm
hello is not bricked...look some other sites they say how to enter extra menus search for dvd hack or something i had a dvr dvd recorder similar problem..found on the net.....that dvd boots but does not load , because it still say something is ok you can fix it.
do not believe what i say 10% its true
Who is online
Users browsing this forum: No registered users and 5 guests