https://en.wikipedia.org/wiki/Linksys_routers#EA6200
Broadcom BCM47081 RAM 128 MB FLASH 128 MB
I made the broken XML I made from the EA2700, it detects but it doesn't report proper CPU and doesn't work for read/write.
After issuing ID Detect with themade up XML this is what I get:
Code: Select all
Target: ea6200
-detect
IDCODE 502BF17F
Broadcom BCM02BF
IMPCODE FFFFFFFF
EJTAG V3.1
DMA not supported
Code: Select all
<Test>
<Name>ea6200</Name>
<Cat>Modem</Cat>
<Protocol>EJTAG64</Protocol>
<Endian>Little</Endian>
<IRLength>8</IRLength>
<DMA>Yes</DMA>
<ProbTrap>1</ProbTrap>
<Programram>0x80200000</Programram>
<Memorys>
<Memory>
<Name>Ram</Name>
<Type>0</Type>
<Address>0x80000000</Address>
<Size>0x2000000</Size>
</Memory>
<Memory>
<Name>CFE</Name>
<Type>1</Type>
<Address>0x9C000000</Address>
<Size>0x40000</Size>
</Memory>
<Memory>
<Name>KERNEL</Name>
<Type>1</Type>
<Address>0x9C040000</Address>
<Size>0x7A0000</Size>
</Memory>
<Memory>
<Name>NVRAM</Name>
<Type>1</Type>
<Address>0x9C7E0000</Address>
<Size>0x20000</Size>
</Memory>
</Memorys>
</Test>