Hello i Brick my Dahua NVR and i need XML file
it has 25l128 chip
i Read the 16MB
i Add the Fullflash dumb , and the firmware that i flash in the NVR Recorder
i need xml file for the recorder when possible .
when i see on the original fw files the first headers must be cut on hex editor .
thanxx in advance
Dahua NVR , XML file
-
- Junior Member
- Posts: 33
- Joined: Fri Jul 04, 2008 12:32 am
Dahua NVR , XML file
You do not have the required permissions to view the files attached to this post.
-
- Junior Member
- Posts: 33
- Joined: Fri Jul 04, 2008 12:32 am
i try to build xml self,
i needed xml for each parts , bootloader , main firmware
but i flashed yet many firmwares from dahau NVR doenst boot.
but i write the shop were i buy the NVR he look if he has an old device
i read than from working the full dump and flash then on my device.
when it work i will post the FW here .
thanks
i needed xml for each parts , bootloader , main firmware
but i flashed yet many firmwares from dahau NVR doenst boot.
but i write the shop were i buy the NVR he look if he has an old device
i read than from working the full dump and flash then on my device.
when it work i will post the FW here .
thanks
-
- Junior Member
- Posts: 33
- Joined: Fri Jul 04, 2008 12:32 am
hello
today i was at my wholesaler and he have a new same NVR Dahua Recorder.
i Read with USBJTAG the full 16MB flash and its WORKING!!Recorder works Good
The flash is the Bootloader and the complete firmware.
when i look the Layout after flashing "wrong" firmware its different.
i Change with HEX editor the MacAdress , because when he sell the other NVR
that there are no problems with Registration on DAHUA P2P Service.
I Upload XML i thing some changes possible but for me its working.
and Wokring Bckup
today i was at my wholesaler and he have a new same NVR Dahua Recorder.
i Read with USBJTAG the full 16MB flash and its WORKING!!Recorder works Good
The flash is the Bootloader and the complete firmware.
when i look the Layout after flashing "wrong" firmware its different.
i Change with HEX editor the MacAdress , because when he sell the other NVR
that there are no problems with Registration on DAHUA P2P Service.
I Upload XML i thing some changes possible but for me its working.
and Wokring Bckup
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 3 guests