Unlocked VT2442 with USBJTAG NT.
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Unlocked VT2442 with USBJTAG NT.
I have unlocked VT2442 with USBJTAG NT and CYT tool last night. Very solid hardware with 8M flash. Wonder why no one convert this into a good Linux platform to run Asterix on it. The program speed is super fast, no need to use serial port to program.
Will do some more testing to fully convert it to a generic SIP device.
Will do some more testing to fully convert it to a generic SIP device.
-
- Junior Member
- Posts: 207
- Joined: Fri Feb 01, 2008 10:20 pm
RE: VT2442 Dials home
But I thought this will automatically "Dial" home to vonage,and they lock it back up again...
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Testing on a new VT2142 and found a new type of flash from AMD (Spansion). This type of flash has different API and can improve the speed. So a newer version of software (0.16) will be released to reflect this change. I read the datasheet that program a full 8M flash should be 63 seconds. But with USB JTAG NT we can get faster than the speed on the datasheet. That is without buffer write. I will see if buffer write can make any change. Could be less than 30 seconds to write the 8M flash.
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Can you just read the boot and change the ADMIN_PWD as RTP300. Erase the log and both cfg then your box should be unlocked. Use your TFTP server of http server to download the configuration.konnan wrote:USBBDM/... I got a vt2442 yesterday... are you going to upload any guide to unlock this devices? Thanks ...
Backup first of course.
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Have you started unlock it?konnan wrote:USBBDM/... I got a vt2442 yesterday... are you going to upload any guide to unlock this devices? Thanks ...
I found unlock is not as easy as other boxes.
11.4.0-r060721-1.1.0 -r3 it the one I found to be the latest.
What I did is to change Admin password. change the hash_dir and CRYPT_KEY. Log in as admin and then write down the "Encryption Key". New version will have this removed.
Then use TFTP server and rc4 your xml file. Setup Provisioning Profile Base URL: and reboot, the configuration is finished. 0.16 software has its xml file already.
Who is online
Users browsing this forum: No registered users and 2 guests