what are the debrick commands.
tried searching but couldnt find any info.
thank you.
vt2142 debrick
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
All brick commands are similar (EJTAG).stealthster wrote:what are the debrick commands.
tried searching but couldnt find any info.
thank you.
Enter DEBUG ON (tap c and tap a ffffffff)
Then detect the flash.
Use slow erase/program to program the boot.
Power off on and use fast programming to program the rest.
If you need help remotely, I might be able to do it in the evening.
-
- Junior Member
- Posts: 5
- Joined: Mon Oct 11, 2010 2:38 am
ok i was able to reprogram it.
and used all these commands
vt2142boot
vt2142log
erase cfg1
erase cfg2
program log
program boot
and am able to access the voice provisioning page
not sure if that was there before the programming? am i suposed to see the sip settings page?
and when is the VT2142 with SIP setting GUI (3.49 MB) file to be programed?
thank you for your help.
and used all these commands
vt2142boot
vt2142log
erase cfg1
erase cfg2
program log
program boot
and am able to access the voice provisioning page
not sure if that was there before the programming? am i suposed to see the sip settings page?
and when is the VT2142 with SIP setting GUI (3.49 MB) file to be programed?
thank you for your help.
Who is online
Users browsing this forum: No registered users and 1 guest