On detect software tells me to report these values...

rainfade · Post by **rainfade** » Sat Sep 17, 2011 6:22 pm

Report these values http://www.usbjtag.com/vbforum 01c7,2873

Playing with my wrtp54g tonight and when I try to detect I get this.

Same windows 7 machine with no major changes from last week.

Copyright (C) 2010,2011,2012
USB JTAG NT 0.53
Target: WRTP54G
-detect
IDCODE 0B52D02F
TI TNETV10552
IMPCODE 41404000
EJTAG V1, V2.0
DMA not supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 01c7,2873

justsomeguy · Post by **justsomeguy** » Sat Sep 17, 2011 7:07 pm

rainfade wrote:Report these values http://www.usbjtag.com/vbforum 01c7,2873

Playing with my wrtp54g tonight and when I try to detect I get this.

Same windows 7 machine with no major changes from last week.

Copyright (C) 2010,2011,2012
USB JTAG NT 0.53
Target: WRTP54G
-detect
IDCODE 0B52D02F
TI TNETV10552
IMPCODE 41404000
EJTAG V1, V2.0
DMA not supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 01c7,2873

ummmm how old is your jtag? is it a NT version or an old school non-supported one?

rainfade · Post by **rainfade** » Sat Sep 17, 2011 7:20 pm

NT, about a week bought on this site's e-commerce site.
I'm hoping it's just the linksys dying not my new usbjtagnt as I have quite a few 360's awaiting a date with gli gil's latest trick the minute it's booting something a bit more fun

Brian

Post by **usbbdm** » Sat Sep 17, 2011 7:44 pm

rainfade wrote:NT, about a week bought on this site's e-commerce site.
I'm hoping it's just the linksys dying not my new usbjtagnt as I have quite a few 360's awaiting a date with gli gil's latest trick the minute it's booting something a bit more fun

Brian

Is this box bricked? You should get flash. Try to use slower speed.

rainfade · Post by **rainfade** » Sat Sep 17, 2011 8:19 pm

At slowest speed (3) if I tell it to read it seems to go out to lunch and do nothing. Subsequently selecting anything the app tells me it's busy.

If I load the application select my device and tell it to erase at the slowest speed it seems to, writing says it completed in 0.00 seconds and to reboot... yeah not so much.

I'm going to dig around to find some other support device in my collection of junk to test and see if the usbjtag nt is working ok.
I'm certainly hoping the linksys decided to die and not my new toy.

Thanks.

justsomeguy · Post by **justsomeguy** » Sun Sep 18, 2011 5:38 am

rainfade wrote:At slowest speed (3) if I tell it to read it seems to go out to lunch and do nothing. Subsequently selecting anything the app tells me it's busy.

If I load the application select my device and tell it to erase at the slowest speed it seems to, writing says it completed in 0.00 seconds and to reboot... yeah not so much.

I'm going to dig around to find some other support device in my collection of junk to test and see if the usbjtag nt is working ok.
I'm certainly hoping the linksys decided to die and not my new toy.

Thanks.

just wanna make sure about this .....did you gt the lynksis code for the tool? or the windows?

Post by **usbbdm** » Sun Sep 18, 2011 9:40 am

I can do a teamviewer section to take a look.

rainfade · Post by **rainfade** » Sun Sep 18, 2011 4:32 pm

It appears the linksys has a problem.

I had a couple of RROD Falcon mobo 360's and wired up one this morning and dumped the NAND with no issues so it appears my usbjtag is good

I'll play with putting my pc's in in my dmz if you'd be willing to do the team viewer session thing and see what you think.
I'm using a checkpoint appliance and am just learning my way around in it so it may be a few days.

I really appreciate all the help, as a noob to this product it is invaluable and reinforces my opinion that I bought the right product.

On detect software tells me to report these values...

On detect software tells me to report these values...

Who is online