What USBJTAG NT command run bin file from ram?
Load file -> setram.....and
Load and run bin file from ram?
-
- Junior Member
- Posts: 8978
- Joined: Mon Jul 18, 2005 9:33 pm
What target you use? MIPS or ARM?fgh8uy wrote:What USBJTAG NT command run bin file from ram?
Load file -> setram.....and
You can try this for MIPS
Enter DEBUG ON
Then modify PC to the address you want.
Then hit F5.
Now normally this will not work the way you want, you might also consider disable all the interrupts if you have damaged the interrupt vector.
-
- Junior Member
- Posts: 2
- Joined: Fri Mar 04, 2011 7:29 am
Thanks for reply!usbbdm wrote:What target you use? MIPS or ARM?
You can try this for MIPS
Enter DEBUG ON
Then modify PC to the address you want.
Then hit F5.
Now normally this will not work the way you want, you might also consider disable all the interrupts if you have damaged the interrupt vector.
Target RT3352 (mips24) "Ralink". Modify PC command poke...?
Who is online
Users browsing this forum: No registered users and 1 guest