sti5203 not detect

Here we discuss the JTAG on platforms. CPU,CPLD etc.
Post Reply
_hrc_
Junior Member
Posts: 40
Joined: Thu May 01, 2008 6:26 am

sti5203 not detect

Post by _hrc_ »

Hello, one question?

The CPU is the STI5203 detects as STI7100 and the trap is turned ON but does not detect the flash could include flash S29GL032A90TFIR31?

http://pdf1.alldatasheet.com/datasheet- ... FIR31.html


DCODE 2D424041
STi STi7100
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum d03d,917b

-regs 1
-detect
IDCODE 2D424041
STi STi7100
========================================
DeviceId = 0x2D424041
OptionId = 0x00500808
PrivateId = 0x02000000
ExtraId = 0xFFFFFFFF
========================================
HUDI Internal Status
----------------------------------------
SR = 0x700000F1
FPSCR = 0x00040001
CCR = 0x0B
FRQCR = 0x0E0A
EXPEVT = 0x0000
INTEVT = 0x3FB4
EBUS = 0x00000000
IBUS = 0xFC000018
SBUS = 0xFFF00008
EBTYPE = 0x00
SBTYPE = 0x00
CMF = 0x00
SCMF = 0x00
MMUCRAT = 0x00
PTEH = 0x00
STATUS = 0x00
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum d03d,917b


Thank you
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

If you see TRAP ON, then it should be quite easy to add the support. However, I might still need to do some development to support this target. It is not as simple as add flash definition. Normally these flashes supports CFI and no need to add to nor flash definition.
_hrc_
Junior Member
Posts: 40
Joined: Thu May 01, 2008 6:26 am

sti5203 not detect

Post by _hrc_ »

usbbdm wrote:If you see TRAP ON, then it should be quite easy to add the support. However, I might still need to do some development to support this target. It is not as simple as add flash definition. Normally these flashes supports CFI and no need to add to nor flash definition.
Can you add flash for a quick test?

Thank you
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests