non ph type 2 problem

jrrr · Post by **jrrr** » Thu Dec 09, 2010 12:00 am

i can not get to the firmware testing on this dct this is what i get when i try to do it i flshdct code and flip firmware and i cut off the c 105 what im missing to do can some give a hand thank you
/////////////////////////////////////////////
// DCT2224
/////////////////////////////////////////////
1. Backup flash and nvram
2. Restore flash and nvram
3. Debrick (When normal programming not working)
4. Firmware Testing (PH7/8/9 and type I PH6/CR4)
5. Firmware Testing (Type II PH6/CR4)
6. Detect type for PH6/CR4 and non PH
7. Exit
Please select

5
-getram code

Time 00:00:19 (.531)
-flipfirm

-firm
not supported
-flipfirm

1. Program the flash.
2. Cancel.
Please select

CAPONE · Post by **CAPONE** » Thu Dec 09, 2010 2:10 am

Download NEW DLL.

jrrr · Post by **jrrr** » Thu Dec 09, 2010 10:50 pm

hey men thanks for your response i down load lattes dll but i was using 40 and it ask me to down load 43 or better and down laoad 44 and this is what im geting know
2. Restore flash and nvram
3. Debrick (When normal programming not working)
4. Firmware Testing (PH7/8/9 and type I PH6/CR4)
5. Firmware Testing (Type II PH6/CR4)
6. Detect type for PH6/CR4 and non PH
7. Exit
Please select
7
Script finished
-reset 1
-init
-R
-getram Code
Time 00:00:04 (.906)
-flshdct code
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,0000
not supported
it dose not let me to reprogram firware or flip or flsh and i cut the c 105 and im using windowns xp what do you think is the problem if you or anybody can give a hand i will appreciated
thans in addvance

jrrr · Post by **jrrr** » Thu Dec 09, 2010 10:52 pm

by the way the type 1 did not gave me any problems

CAPONE · Post by **CAPONE** » Fri Dec 10, 2010 9:07 am

Then Download the new Software. 0.44. Why are you Still Stuck with the Old Software?

I make new Folders for Each Release. This way I have the Old ones Save In case I ever want to use them. However alway use te newest release Unless I have a Problem and then test with older software.

jrrr · Post by **jrrr** » Fri Dec 10, 2010 11:48 pm

i did down load the new one but still having problems

// DCT2224
/////////////////////////////////////////////
1. Backup flash and nvram
2. Restore flash and nvram
3. Debrick (When normal programming not working)
4. Firmware Testing (PH7/8/9 and type I PH6/CR4)
5. Firmware Testing (Type II PH6/CR4)
6. Detect type for PH6/CR4 and non PH
7. Exit
Please select
5
-getram code
Time 00:00:04 (.938)
-flipfirm
-firm
not supported
-flipfirm
1. Program the flash.
2. Cancel.
Please select

Post by **usbbdm** » Sat Dec 11, 2010 12:16 am

You need download latest dll and software.

jrrr · Post by **jrrr** » Sat Dec 11, 2010 10:48 pm

OK i did down load USBJTAGNT Software 0.45a and DCT2224.DLL : Oct 25 0.33 Support 8.17. 0.32a fix bug that tvguide is blocked when upgrade is disabled. 0.32 fi ... [more] (70.7 KB) and now it just don't open is maybe a bug

jrrr · Post by **jrrr** » Sat Dec 11, 2010 11:16 pm

i did not have any problem w non ph type 1 w older sofware 0.40 but this type 2 has been a pain

Post by **usbbdm** » Sun Dec 12, 2010 12:19 am

how sure it is type 2?
Can you manually to it without using script?

jrrr · Post by **jrrr** » Sun Dec 12, 2010 8:35 pm

/ DCT2224
/////////////////////////////////////////////
1. Backup flash and nvram
2. Restore flash and nvram
3. Debrick (When normal programming not working)
4. Firmware Testing (PH7/8/9 and type I PH6/CR4)
5. Firmware Testing (Type II PH6/CR4)
6. Detect type for PH6/CR4 and non PH
7. Exit
Please select
6
-getram nvram

Time 00:00:00 (.843)
This is type II.
Press enter to continue.Spacebar and enter to break....
this is the only way i know

CAPONE · Post by **CAPONE** » Sun Dec 12, 2010 9:34 pm

jrrr wrote:/ DCT2224
/////////////////////////////////////////////
1. Backup flash and nvram
2. Restore flash and nvram
3. Debrick (When normal programming not working)
4. Firmware Testing (PH7/8/9 and type I PH6/CR4)
5. Firmware Testing (Type II PH6/CR4)
6. Detect type for PH6/CR4 and non PH
7. Exit
Please select
6
-getram nvram

Time 00:00:00 (.843)
This is type II.
Press enter to continue.Spacebar and enter to break....
this is the only way i know

Type Help and Software will Show List of commands.
like
getram code
getram nvram

Its a good Idea to become Familiar with doing the Commands Manualy.

Post by **usbbdm** » Sun Dec 12, 2010 10:18 pm

If you want I can take a look over teamviewer. Mostly it is not the problem of the software.

Are you sure it is boot from the TSOP not from the DIP flash? It will show blue/white if it is boot from TSOP when go to diag. If not it will be black/white.

jrrr · Post by **jrrr** » Sun Dec 12, 2010 11:19 pm

what i can i do teamviewer so you can see what im talking about:

jrrr · Post by **jrrr** » Sun Dec 12, 2010 11:22 pm

how can we do teamviewer so you can see what im talking about

USB JTAG