Hard Debrick DCT2500 video.

JTAG on dct2500/dct700
Locked
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Hard Debrick DCT2500 video.

Post by usbbdm »

As promised I created a video to hard debrick DCT2500.

Hops this can help a lot of people and no more need me remote debrick the box.
justsomeguy
Junior Member
Posts: 1417
Joined: Wed Jan 28, 2009 4:01 pm

Post by justsomeguy »

great video boss man ! i'm sure this will help alot of people. should deffenitly be a sticky . i'm sure alot of people will be directed to this when they ask for help
live your life like a beer commericial
antwandavis1
Junior Member
Posts: 46
Joined: Sat Feb 28, 2009 11:38 am

Post by antwandavis1 »

Where to i get a J200 from because my box don't have that sorry to cut in
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

antwandavis1 wrote:Where to i get a J200 from because my box don't have that sorry to cut in
LOL YES IT DOES have it if its a DCt2500. If I am not Mistaken Mr.USBBDM eve Posted a Picture of It.

LOOK I MARKED IT For you So no Need to Hurt your self Looking For it. :D
You do not have the required permissions to view the files attached to this post.
talk2dang
Junior Member
Posts: 19
Joined: Wed Dec 10, 2008 3:48 pm

Debrick dct2500

Post by talk2dang »

I has followed your instruction. I got the DEBUG ON, and remove the jumper I still getting this:

-detect
IDCODE 2711517F
Broadcom BCM7115
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,000a

Is my dct2500 really dead?:confused:
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

talk2dang wrote:I has followed your instruction. I got the DEBUG ON, and remove the jumper I still getting this:

-detect
IDCODE 2711517F
Broadcom BCM7115
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,000a

Is my dct2500 really dead?:confused:
Try to use slow JTAG speed. "speed 2"
This had worked for one of the member via teamviewer.
talk2dang
Junior Member
Posts: 19
Joined: Wed Dec 10, 2008 3:48 pm

Post by talk2dang »

I tried with speed 2, but still no difference. Any other suggestion?
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

talk2dang wrote:I tried with speed 2, but still no difference. Any other suggestion?
At This point, What do you see on Front pannel? 8888? If you see all 8888 then you will need to use the j200 DeBrick method.

See Picture on Post #4 for Location of the J200 Pins that need to Be Jumpered.
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

talk2dang wrote:I tried with speed 2, but still no difference. Any other suggestion?
Setup teamviewer and I can have a try.
liljayballer1010
Junior Member
Posts: 28
Joined: Thu Jan 22, 2009 11:24 am
Contact:

hello

Post by liljayballer1010 »

where can I find the J200 Pins on dct700? please help
Locked

Who is online

Users browsing this forum: No registered users and 10 guests