It cam with jtag port... and i conect our usbjtag(nt)
This what i get with Detect command.
Code: Select all
Copyright (C) 2010,2011,2012
USB JTAG NT 0.50
Target: WRT54G4M
-detect
IDCODE 1471217F
Broadcom BCM4712
IMPCODE 00800904
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum [color=red][b]0020,225d[/b][/color]
Code: Select all
ELECTRONIC SIGNATURE
– Manufacturer Code: 0020h
– Top Device Code M29DW324DT: 225Ch
– Bottom Device Code M29DW324DB: [color=red]225Dh[/color]
Code: Select all
h[color=red]xx[/color]p://www.datasheetcatalog.org/datasheet/stmicroelectronics/8730.pdf
For you help... thankz in advanced.
If need more info. y got some picture.
=======================================================
Update:
I open the file "flash.xml" and add one Flash type using one close to the number 29DW324....
Code: Select all
<flash>
<id1>0x1</id1>
<id2>0x225C</id2>
<name>AMD 29DL324GT</name>
<size>0x400000</size>
<protocol>0</protocol>
<block>
<secnum>63</secnum>
<secsize>0x10000</secsize>
<secnum>8</secnum>
<secsize>0x2000</secsize>
</block>
</flash>
[color=red] <flash>
<id1>0x1</id1>
<id2>0x225D</id2>
<name>AMD 29DW324DB</name>
<size>0x400000</size>
<protocol>0</protocol>
<block>
<secnum>63</secnum>
<secsize>0x10000</secsize>
<secnum>8</secnum>
<secsize>0x2000</secsize>
</block>
</flash>[/color]
Code: Select all
Copyright (C) 2010,2011,2012
USB JTAG NT 0.50
Target: WRT54G4M
-detect
IDCODE 1471217F
Broadcom BCM4712
IMPCODE 00800904
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 Compatible flash AMD 29DW324DB
Code: Select all
-getram CFE
Time 00:00:01 (.094)
-cmpram CFE
Time 00:00:01 (.110)
Compare data OK
-getram KERNEL
Time 00:00:16 (.141)
-cmpram KERNEL
Time 00:00:16 (.390)
Compare data OK
-getram NVRAM
Time 00:00:00 (.297)
-cmpram NVRAM
Time 00:00:00 (.281)
Compare data OK
Any help is very appreciate . . .
====================================================
2nd Update:
I make this xml and save as "TWBR2_G54_4M.xml" and put it with the other file in config directory..
Code: Select all
<Test>
<Name>WBR2_G54_4M</Name>
<Cat>Router</Cat>
<Protocol>EJTAG</Protocol>
<Dll>CFE.dll</Dll>
<Endian>Little</Endian>
<IRLength>8</IRLength>
<DMA>Yes</DMA>
<ProbTrap>1</ProbTrap>
<Programram>0x80200000</Programram>
<Memorys>
<Memory>
<Name>Ram</Name>
<Type>0</Type>
<Address>0x80000000</Address>
<Size>0x800000</Size>
</Memory>
<Memory>
<Name>CFE</Name>
<Type>1</Type>
<Address>0x9FC00000</Address>
<Size>0x40000</Size>
</Memory>
<Memory>
<Name>KERNEL</Name>
<Type>1</Type>
<Address>0x9FC40000</Address>
<Size>0x3B0000</Size>
</Memory>
<Memory>
<Name>NVRAM</Name>
<Type>1</Type>
<Address>0x9FFF0000</Address>
<Size>0x10000</Size>
</Memory>
</Memorys>
</Test>
Thankz Again . . .