need help with sb6120

shorty883 · Post by **shorty883** » Tue Feb 09, 2010 10:13 pm

i am trying to detected the flash type and this is what it tells me

-flshdct o
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0000,0000

can some one please help

Post by **usbbdm** » Wed Feb 10, 2010 12:41 am

shorty883 wrote:i am trying to detected the flash type and this is what it tells me

-flshdct o
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0000,0000

can some one please help

I will suggest to check the connection. Especially the ISP pin.

shorty883 · Post by **shorty883** » Wed Feb 10, 2010 6:46 am

it looks that all my connetions look good do u have a pic that shows the connections on the modem so i can make sure the other pic was right

stomperz · Post by **stomperz** » Wed Feb 10, 2010 6:59 am

shorty883 wrote:it looks that all my connetions look good do u have a pic that shows the connections on the modem so i can make sure the other pic was right

http://rapidshare.com/users/DHKLPZ

shorty883 · Post by **shorty883** » Wed Feb 10, 2010 7:08 am

okay all my connetions r good but it still wont detected a flash

shorty883 · Post by **shorty883** » Wed Feb 10, 2010 2:32 pm

okay now i am getting this

Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 009f,009f

anyone have any ideas

boarder1042 · Post by **boarder1042** » Wed Feb 10, 2010 8:31 pm

connect all the pins to your jtag except the isp. (pin 1)

Power on the modem until the blue light flashes then connect the isp pin. All the lights should go off. Then hit detect.

dtox69 · Post by **dtox69** » Thu Feb 11, 2010 8:22 pm

boarder1042 wrote:connect all the pins to your jtag except the isp. (pin 1)

Power on the modem until the blue light flashes then connect the isp pin. All the lights should go off. Then hit detect.

or just have the other end of the jtag cable not connected to the usbjtagnt device....

peghede · Post by **peghede** » Sat Feb 20, 2010 3:27 pm

-flshdct 0
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0000,0000

same crap here. soldered all six wires and bs...every one says is easy ...can some one post or tell where the pin number on jtagnt is and how they run???? also how would u connect the six wires inside the nt??

peghede · Post by **peghede** » Sat Feb 20, 2010 3:36 pm

now this:
-flshdct 0
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 009f,009f

wtf with this bs

dtox69 · Post by **dtox69** » Sat Feb 20, 2010 4:07 pm

Hm you soldered the wires in the right spots?

http://img381.imageshack.us/img381/2627 ... pinout.png

peghede · Post by **peghede** » Sat Feb 20, 2010 4:34 pm

yes same like in the pic

Post by **usbbdm** » Sat Feb 20, 2010 5:36 pm

You need to power on the modem. At this point, the modem will NOT power on and the detect will give you the flash ID.

peghede · Post by **peghede** » Sat Feb 20, 2010 6:24 pm

i did dat to and nothing..dammit

peghede · Post by **peghede** » Sat Feb 20, 2010 6:54 pm

:mad:nothing

USB JTAG

need help with sb6120

need help with sb6120

Try This

Who is online