I'm making a header for this modem using pix from thread.I need to know the lay out/pins on the usbjtag_nt header.If this has been shown please refference me to the post.
Thanks
Header for SBV4200
-
- Junior Member
- Posts: 8973
- Joined: Mon Jul 18, 2005 9:33 pm
http://www.usbjtag.com/jtagdevices/sbv4200.php for SBV4200 layout.
As of USBJTAG NT layout, user manual pdf has it.
Also can be found in here.
http://www.usbjtag.com/jtagnt/ariza700.php
As of USBJTAG NT layout, user manual pdf has it.
Also can be found in here.
http://www.usbjtag.com/jtagnt/ariza700.php
-
- Junior Member
- Posts: 146
- Joined: Fri Sep 30, 2005 4:17 pm
Here's what I got for the header:
1= trst(didn't see this in pix)
2= grnd
3= tdi
4= grnd
5= tdo (jumper to r37)
6= grnd
7= tms
8= grnd
9= tck
10= grnd
11=reset(didn't see on pix)
12=(not shown on layout)
13=debug(not used)
14= no connection
vcc,grnd,tx and rx shown.Are these used for serial rs232 and not ejtag?
Can someone verfiy and correct this info if necessary?
1= trst(didn't see this in pix)
2= grnd
3= tdi
4= grnd
5= tdo (jumper to r37)
6= grnd
7= tms
8= grnd
9= tck
10= grnd
11=reset(didn't see on pix)
12=(not shown on layout)
13=debug(not used)
14= no connection
vcc,grnd,tx and rx shown.Are these used for serial rs232 and not ejtag?
Can someone verfiy and correct this info if necessary?
-
- Junior Member
- Posts: 146
- Joined: Fri Sep 30, 2005 4:17 pm
Here's what I got for the header:
1= trst(didn't see this in pix)
2= grnd
3= tdi
4= grnd
5= tdo (jumper to r37)
6= grnd
7= tms
8= grnd
9= tck
10= grnd
11=reset(didn't see on pix)
12=(not shown on layout)
13=debug(not used)
14= no connection
Pin 1: not used
Pin 2-10 shorted together and connected to grnd at J4
Pin 3:connected to TDI
Pin 5 connected to TDO via jumper to R37 on bottom of board
Pin 7 connected to TMS
Pin 9 connected to TCK
Pins 11,12,13,14 not used
Looking at pix with header. Pin 1 is bottom row 1st pin on left.
This is just to further hard work (already done).
1= trst(didn't see this in pix)
2= grnd
3= tdi
4= grnd
5= tdo (jumper to r37)
6= grnd
7= tms
8= grnd
9= tck
10= grnd
11=reset(didn't see on pix)
12=(not shown on layout)
13=debug(not used)
14= no connection
Pin 1: not used
Pin 2-10 shorted together and connected to grnd at J4
Pin 3:connected to TDI
Pin 5 connected to TDO via jumper to R37 on bottom of board
Pin 7 connected to TMS
Pin 9 connected to TCK
Pins 11,12,13,14 not used
Looking at pix with header. Pin 1 is bottom row 1st pin on left.
This is just to further hard work (already done).
You do not have the required permissions to view the files attached to this post.
-
- Junior Member
- Posts: 9
- Joined: Fri Jun 23, 2006 9:36 am
Sbv4200 rare message
hi if ne1 could help please..
i have 5 sbv4200 and made the pin header change to use the usbjtagnt with it and this is what i get
"detect
IDCODE 0334517F
Broadcom BCM3345
IMPCODE FFFFFFFF
Note this is 64bit MIPS,Please fix the def file"
do i have the wrong file definition
thanks in advance
cucu..
i have 5 sbv4200 and made the pin header change to use the usbjtagnt with it and this is what i get
"detect
IDCODE 0334517F
Broadcom BCM3345
IMPCODE FFFFFFFF
Note this is 64bit MIPS,Please fix the def file"
do i have the wrong file definition
thanks in advance
cucu..
Who is online
Users browsing this forum: No registered users and 1 guest