need help with 5100
-
- Junior Member
- Posts: 24
- Joined: Wed Apr 22, 2009 11:55 am
need help with 5100
my problem is this modem was working fine week ago.
now problem is it light ,2,3rd light is solid green. but 4th light is keep flashing ( 5th light is fine with plunging Ethernet wire.) send & receiving is fine,problem is going on line light. it should be solid. but it just flashing.i debrick & reprogram also but same thing.please let me know what to do.
thanks in advance.
now problem is it light ,2,3rd light is solid green. but 4th light is keep flashing ( 5th light is fine with plunging Ethernet wire.) send & receiving is fine,problem is going on line light. it should be solid. but it just flashing.i debrick & reprogram also but same thing.please let me know what to do.
thanks in advance.
-
- Junior Member
- Posts: 289
- Joined: Fri Nov 10, 2006 3:30 pm
are you on comcast, same thing happened to me, using sigma-x2, i hear sb5100mod should work, i have it, but dont know how to set it up,bichhoo wrote:my problem is this modem was working fine week ago.
now problem is it light ,2,3rd light is solid green. but 4th light is keep flashing ( 5th light is fine with plunging Ethernet wire.) send & receiving is fine,problem is going on line light. it should be solid. but it just flashing.i debrick & reprogram also but same thing.please let me know what to do.
thanks in advance.
if someone knows please send me pm.
-
- Junior Member
- Posts: 2
- Joined: Sun Dec 09, 2007 9:12 am
Fw upgrades
Comcast is forcing FW upgrades in some areas therefore if your modem does not report the right FW; it won’t even get pass the “SEND†light. You have to Spoof your FW to get passed Comcast security. Sigma X2 is not a good candidate to bypass Comcast securities. Stick with 5100mod 1.04b for the SB5100 & Haxorware 1.1 rev32 for the SB5101.
-
- Junior Member
- Posts: 321
- Joined: Sun Nov 11, 2007 7:07 am
- Location: Chicago
SB5100 Mod
Try this
On the SB5100MoD:
On the Clone TAB:
Software: SB6120-1.0.1.7-SCM00-NOSH.NNDMN
sysDescr: SB6120-1.0.1.7-SCM00-NOSH
docsDevDwCurrentVers:
NOTE: You must change each string and click save below it one at a time.
On the CM Config TAB:
Options:
Load Config from Flash: (CHECK)
Configuration file from Flash Memory:
Current file
File Name:
d11_m_sb6120_widebandblast_c01.cm
On the SB5100MoD:
On the Clone TAB:
Software: SB6120-1.0.1.7-SCM00-NOSH.NNDMN
sysDescr: SB6120-1.0.1.7-SCM00-NOSH
docsDevDwCurrentVers:
NOTE: You must change each string and click save below it one at a time.
On the CM Config TAB:
Options:
Load Config from Flash: (CHECK)
Configuration file from Flash Memory:
Current file
File Name:
d11_m_sb6120_widebandblast_c01.cm
-
- Junior Member
- Posts: 289
- Joined: Fri Nov 10, 2006 3:30 pm
update
Follow yours steps one by one, ON the last step where it saysstomperz wrote:Try this
On the SB5100MoD:
On the Clone TAB:
Software: SB6120-1.0.1.7-SCM00-NOSH.NNDMN
sysDescr: SB6120-1.0.1.7-SCM00-NOSH
docsDevDwCurrentVers:
NOTE: You must change each string and click save below it one at a time.
On the CM Config TAB:
Options:
Load Config from Flash: (CHECK)
Configuration file from Flash Memory:
Current file
File Name:
d11_m_sb6120_widebandblast_c01.cm
Configuration file from Flash Memory
Current File
this is what i get.
File Name: n/a
File Size n/a
There is no place to type a configuration file.
Config Changer is checked at Load Config from Flash Memory:
Anyone else having this problem. thnks. i typed the above config name in notebook, and saved it. I then I used config uploader to send it to configuration file from Flash Memory, the problem is i get this in File Name. d11_m_sb6120_widebandblast_c01.cm.txt
I think the txt at end of config file is screwing me up. how do i get rid of it?
-
- Junior Member
- Posts: 638
- Joined: Fri Aug 20, 2010 1:47 pm
- Location: Some ware just like you.
- Contact:
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Should go to CH and READ you will Find the Answer there.bichhoo wrote:my problem is this modem was working fine week ago.
now problem is it light ,2,3rd light is solid green. but 4th light is keep flashing ( 5th light is fine with plunging Ethernet wire.) send & receiving is fine,problem is going on line light. it should be solid. but it just flashing.i debrick & reprogram also but same thing.please let me know what to do.
thanks in advance.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 638
- Joined: Fri Aug 20, 2010 1:47 pm
- Location: Some ware just like you.
- Contact:
-
- Junior Member
- Posts: 8979
- Joined: Mon Jul 18, 2005 9:33 pm
For SB5100 if you can detect flash it is easy to debrick. Just use erase and sprogram. If you cannot detect flash, read this http://www.usbjtag.com/jtagnt/debricksb5100.phpmoddog wrote:is there a video show how to debrick sb5100 just want to no?
-
- Junior Member
- Posts: 638
- Joined: Fri Aug 20, 2010 1:47 pm
- Location: Some ware just like you.
- Contact:
I can detect detect flash thanks master!usbbdm wrote:For SB5100 if you can detect flash it is easy to debrick. Just use erase and sprogram. If you cannot detect flash, read this http://www.usbjtag.com/jtagnt/debricksb5100.php
Who is online
Users browsing this forum: No registered users and 4 guests